Relationship Between The Condition Of The Air-To-Water Heatpump Indoor And Outdoor Units And Pressure And Electric Current - Philips WH-UD16CE5-A-1 Service Manual

17.2 Relationship between the Condition of the Air-to-Water Heatpump
Indoor and Outdoor Units and Pressure and Electric Current
Condition of the
Air-to-Water Heatpump
indoor and
outdoor units
Water leakage or
insufficient water flow
rate in the system
Excessive amount of
refrigerant
Inefficient compression
Insufficient refrigerant
(gas leakage)
Outdoor heat exchange
deficiency
Clogged expansion valve
or Strainer

Carry out the measurements of pressure, electric current, and temperature fifteen minutes after an operation is
started.
Heating Mode
Low Pressure High Pressure Electric current Low Pressure
during operation
102
Cooling Mode
High Pressure Electric current
during operation