Adjusting The Parameter Settings For Pro Logic Ii Music - Yamaha AV-XS80 Owner's Manual

CHANGING THE PARAMETER SETTINGS FOR DSP PROGRAMS

Adjusting the parameter settings for PRO LOGIC II Music

I Changing parameter settings
You can adjust the values of PRO LOGIC II Music
parameters so the sound fields are recreated accurately in
your listening room.
9 0
,
u , d
1
Press AMP.
2
Select PRO LOGIC II Music.
Refer to "Selecting PRO LOGIC II" on page 24 for
details.
3
Press u / d to select the parameter.
4
Press j / i to change the parameter value.
5
Repeat steps 3 and 4 above as necessary to
change other parameters.
42
E8-S80-35-42(5.29)a
DVD
AMP
CODE SET AMP
HALL JAZZ ROCK ENTERTAINMENT
1 2 3 4
SPORTS MONO MOVIE MOVIE 1 MOVIE 2
5 6 7 8
/DTS SELECT MATRIX 6.1 STEREO
9 0 10 CANCEL
TOP MENU MENU
LEVEL SET MENU
MUTE
PRESET
ABCDE
CH CH
ENTER
PRESET
TEST B.BOOST
VOL
ON SCREEN RETURN
j , i
(U.S.A. model)
42
I PRO LOGIC II Music parameter
descriptions
PANORAMA
Function: Turning the function on extends the front
stereo image to include the surround
speakers for wraparound effect.
Choices: OFF/ON, initial setting is OFF.
DIMENSION
Function: Gradually adjusts the soundfield either
towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the
front), initial setting is STD (standard).
CT WIDTH (Center width)
Function: Adjusts the center image from the center
and front speakers to varying degrees. The
larger the value, adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.
02.6.29, 4:34 AM