Download Print this page

Panasonic TY-WK22LT1U Installation Manual page 6

Wide-screen lcd television

Advertisement

Installation (main unit preparation)
Install wall mounting brackets A and B (main unit side and wall side) correctly and securely.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
Remove the cable cover
Press down on the tabs (2 locations)
1
on the lower section of the cable
cover to release the locks, and pull
the tabs toward you.
Locking
tabs
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2
Remove the stand cover
Remove the cover mounting screws
1
(4 units).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3
Remove the stand
Place a soft cloth on a
1
flat surface and place
the television on the
c l o t h w i t h t h e L C D
panel facing down. Take
caution so that the LCD
panel does not get
scratched.
Remove the stand mount-
2
ing screws (6 units).
Hold the locks at the center of the
2
cable cover (both sides) and remove
the cover.
Locks
Pull the cover up in the direction the
2
shown and remove the stand cover.
Slide the stand in the
3
direction of the arrow
and remove by pulling
it up.
10
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4
Mount the clampers on the metal plate (main unit side)
Insert the clampers (3 units) into the
1
clamper mounting holes of the metal
plate (main unit side) from the side
with bulges.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5
Mount the metal plate (main unit side)
Align the concave sections (2 loca-
1
tions) located on the upper section of
the metal plate with the convex sec-
tions on the rear of the wide-screen
LCD television.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6
Attach the fall prevention strings
Attach the fall prevention strings (2 units) from the inner side of wall mounting bracket A
(main unit side) as shown in the diagram.
Turn the clampers 90° to lock.
2
At this time, mount the clampers so
that the hooks are facing down.
Fix the metal plate (main unit side)
2
using 2 mounting screws A (main unit
side).
(M4x10 mm)
11

Advertisement

loading

This manual is also suitable for:

22lt series