Cleaning and user maintenance shall not be made by children • without supervision. General Safety Only a qualified person must install this appliance and replace • the cable. Do not operate the appliance by means of an external timer or • separate remote-control system. www.zanussi.com...
• Always be careful when you move the cookware to fall from the appliance when the appliance because it is heavy. Always wear door or the window is opened. safety gloves. • Do not pull the appliance by the handle. www.zanussi.com...
• This appliance is not connected to a device, – do not put water directly into the hot which evacuates the products of appliance. combustion. Make sure to connect the www.zanussi.com...
• Keep children away when the grill is in use. Authorised Service Centre. • Do not put the oven shelf with food on the • Be careful when you remove the door from highest shelf level. the appliance. The door is heavy! www.zanussi.com...
Initial Natu- ral gas set- tings Additional gas injectors Hob integra- ted ignition on the control knob Hob ignition on the spark generator button Oven integra- ted ignition on the control knob Oven ignition on the spark generator button www.zanussi.com...
Page 7
Cast port iron General overview Button for the turnspit Button for the spark generator Knob for the Minute Minder Knob for the oven functions Button for the lamp Knobs for the hob Grill Lamp Turnspit hole Shelf positions www.zanussi.com...
Let the oven cool down. Dampen a soft cloth with warm water and a little mild washing-up Preheating liquid and use this to clean the oven cavity. Preheat the empty appliance to burn off the remaining grease. Hob - Daily use WARNING! Refer to Safety chapters. www.zanussi.com...
Page 9
1 minute. Turning the burner off If after some tries the burner does To put the flame out, turn the knob to the off not light, check if the crown and its cap are in the correct position. position www.zanussi.com...
If not, the to washing in a dishwasher. They dirt can cause damage to the hob. must be washed by hand. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob www.zanussi.com...
If not, the gas flow Oven safety device: is interrupted. The gas oven has a thermocouple. It Manual ignition of oven gas burner stops the gas flow if the flame goes out. 1. Open the oven door. 2. Ignite the oven gas burner. www.zanussi.com...
6. Put the oven shelf with the meat on shelf position 3. position 7. Put a baking tray or roasting pan below, on shelf position 2, to collect the juices. If there is temporarily no power supply open the oven door hold a flame near the grill burner www.zanussi.com...
3. Put the baking tray on the lowest shelf level. Make sure it does not touch the back wall of the 4. Snap out one end of the support hook from oven. the oven ceiling A and let it hang on the other end. www.zanussi.com...
This is normal. • The manufacturer recommends that you use Always stand back from the appliance when the lower temperature the first time. you open the appliance door while cooking. www.zanussi.com...
Quantity (kg) Grill position Time (min) Shelf position Sheep on skewer 1.5 - 2.0 max. 100 - 120 Turnspit Chicken on skew- 1.2 - 1.8 max. 100 - 110 Turnspit Oven - Care and cleaning WARNING! Refer to Safety chapters. www.zanussi.com...
Page 18
Before activating the catalytic cleaning remove all the accessories from the oven. The walls with a catalytic coating are self- cleaning. They absorb fat which collects on the walls while the appliance operates. www.zanussi.com...
Refer to the connection diagram. There is no spark when you try to The fuse is released. Make sure that the fuse is the activate the spark generator. cause of the malfunction. If the fuse releases again and again, contact a qualified electrician. www.zanussi.com...
Page 20
Do not remove yourself, contact your dealer or an Authorised the rating plate from the appliance cavity. Service Centre. We recommend that you write the data here: Model (MOD.) ......... Product number (PNC) ......... Serial number (S.N.) ......... www.zanussi.com...
850 - 870 Width Depth Appliance class Other technical data Appliance category: II2H3B/P LPG: G30 (3B/P) 28-30 mbar Natural Gas: G20 (2H) 20 mbar Bypass diameters BURNER Ø BYPASS 1/100 mm Auxiliary 29 / 30 Semi-rapid Rapid Oven Grill www.zanussi.com...
Page 22
Flexible nonmetal pipes connection If you have an easy access to the connection, you can use a flexible pipe. The flexible pipe must be tightly attached by clamps. www.zanussi.com...
Page 23
You can find this plate in the bag supplied with the appliance. If the supply gas pressure is not constant or it is different from the necessary pressure, install an applicable pressure adjuster on the gas supply pipe. www.zanussi.com...
Page 24
7. Screw on slowly the bypass screw till the burner. flame becomes minimum and stable. 8. Put the knob for the hob back on. Oven injector replacement 1. Remove the bottom plate of the oven cavity to get access to the oven burner . www.zanussi.com...
Page 25
Gas grill injector replacement 2. Remove the knob for the oven functions. If there is no access to the bypass screw 1. Release the screws which keep the grill dismount the control panel before burner in position A. adjustment start. www.zanussi.com...
To install all the accessories, do the first step in an opposite sequence. Electrical installation WARNING! The manufacturer is not responsible if you do not follow the safety precautions from Safety chapters. www.zanussi.com...
Page 27
Return the product to your the packaging in applicable containers to local recycling facility or contact your municipal recycle it. Help protect the environment and office. human health and to recycle waste of electrical and electronic appliances. Do not dispose www.zanussi.com...