Table of Contents
Advertisement
Wireless
Select either "2.4G" or "5G".
Basic Settings
This page is used to configure the parameters for wireless LAN clients that
may connect to this unit. Here you may change wireless relative settings
as well as wireless network parameters.
When the settings are complete, click "Apply".
≥ The settings will be applied after you click "Refresh" and wait for a while.
≥ To reconfigure the settings, click "Back".
Item
WiFi UP/DOWN
Network Mode
1st SSID
Channel Width
Channel Number
SSID stealth
Description
The setting changes each time you click the item.
You can turn on/off the 2.4 GHz or 5 GHz
radio signal setting.
You can select the setting from the pull
down menu.
It is the wireless network name.
The SSID can be 32 bytes long.
You can select the setting from the pull
down menu.
You can select the setting from the pull down menu.
Select the wireless communication channel
from the pull-down menu.
You can select the setting from the pull
down menu.
- 18 -
Advertisement
Table of Contents
