TCD230_240FX(e)_QG.fm Page 1 Friday, May 20, 2005 11:59 AM Digital Cordless Phone KX-TCD230FX Model No. Digital Cordless Answering System KX-TCD240FX Model No. Quick Guide Please read the operating instructions for further details. Controls Handset A Speaker B Charge contact C {j/OK} (Menu/OK)
Page 2
TCD230_240FX(e)_QG.fm Page 2 Friday, May 20, 2005 11:59 AM Base unit (KX-TCD230) C D E A Speaker B Charge contact C Navigator key L {>}{<}: To adjust the ringer and speaker volumes. L {<}{>}: To select the desired ringtone. D In use indicator L Lights when a handset is in use (on a call, etc.).
Page 3
TCD230_240FX(e)_QG.fm Page 3 Friday, May 20, 2005 11:59 AM Base unit (KX-TCD240) A Speaker B Charge contact C Display D {Answer on}/Answer on indicator E {d} (Greeting) F {4} (Erase) G Navigator key L {>}{<}: To adjust the ringer and speaker volumes.
TCD230_240FX(e)_QG.fm Page 4 Friday, May 20, 2005 11:59 AM Displays Handset display icons Various icons appear on the handset display to indicate the current status of the unit. Within range of a base unit Voice enhancer is set to high [VE] or low tone.
TCD230_240FX(e)_QG.fm Page 5 Friday, May 20, 2005 11:59 AM Connections When the AC adaptor is connected, a short beep will be heard. If it is not heard, check the connections. Important: L Use only the AC adaptor and telephone line cord supplied with this unit. Hook Note: L Never install telephone wiring during a...
TCD230_240FX(e)_QG.fm Page 6 Friday, May 20, 2005 11:59 AM Turning the power on Press {ih} for about 1 second. Setting dialling mode (tone/pulse) Press {j/OK}. Select “Base Unit Setup”, then press {>}. Enter “0000” (default base unit PIN). Select “Call Options”, then press {>}. Select “Dial Mode”, then press {>}.
Page 7
TCD230_240FX(e)_QG.fm Page 7 Friday, May 20, 2005 11:59 AM Feature Operation To mute your voice during a call Press {C/T}. To return to the conversation, press {C/T} again. To store a name and phone number Press {k}, {j/OK}, select “New Entry”, then in the handset phonebook press {>}.
Page 8
TCD230_240FX(e)_QG.fm Page 8 Friday, May 20, 2005 11:59 AM Feature Operation To change the ringtone used by the KX-TCD230 users: base unit for outside calls Press {<} or {>} repeatedly to select the desired ringtone. KX-TCD240 users: Press {>} or {<} when the base unit is in standby mode.