Table of Contents
Advertisement
10
Model 510 Sensor: Installation Guide
3.3 Hardware Dimensions
Diameter
16.76 cm
(6.6 inches)
Height
4.69 cm
(1.85 inches)
Figure 2: Model 510 Sensor Dimensions
3.4 Cable Requirement
The Ethernet ports on the 510 sensor cannot accept a CAT 5 cable that has an uneven sheath such
as the one shown below. The RJ-45 connector on the cable will not seat properly in the
receptacle on the access point. Use a CAT 5 cable with an even sheath instead.
Uneven sheath
Figure 3: CAT 5 Cable with Uneven Sheath
Hide quick links:
Advertisement
Table of Contents
