Table of Contents
Advertisement
Programmable Settings
Programming using the function keys
You can program features using the functions keys ({F1}, {F2} and {F3} keys).
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages.
Important:
L Before programming, make sure the unit is not being used.
1
To begin programming, press {MENU} ({F2} key).
2
Press {<} or {>} to scroll through the main menu.
3
Press {SELECT} ({F3} key) to select the desired main menu item.
4
Press {<} or {>} to scroll through the sub-menu.
5
Press {SELECT} ({F3} key) to select the desired sub-menu item.
6
Press {<} or {>} repeatedly to select the desired setting.
7
Press {SAVE} ({F3} key) to save the new setting.
8
Press {STOP} to exit programming mode.
Note:
L The default settings are indicated by *.
Main menu
Sub-menu
Caller list
Ringer
Ringer volume
setting
Ringer tone
Initial
LCD contrast
setting
Key tone
Set area code
Set recall time
During programming:
L To exit programming, press {STOP} at any time.
L You can press {SET} instead of pressing {SELECT} ({F3} key) and {SAVE} ({F3} key).
L To go back to the previous menu, press {BACK} ({F1} key).
L A Q indicates the current setting.
22
Option
-
Low, Medium, High*, Off
Pattern 1*–3
Level 1–6 (Default: 3)
On*, Off
900 ms, 700 ms, 600 ms,
400 ms, 300 ms, 250 ms,
200 ms, 160 ms, 110 ms,
100 ms*, 90 ms, 80 ms
Reference page
for programming
-
page 18
page 23
page 23
page 23
page 25
-
page 24
page 24
Advertisement
Table of Contents
