Page 4
SLEEPSTATION CERTIFICATION LABEL Product Code - UP10133 This bunk bed model has been tested Distributed by : Julian Bowen Limited by an independent laboratory and is in Ben nck House, compliance with BS EN 747-1:2012 + Park Lane Business Park, A1:2015 - Standard Consumer Safety Kirkby-in-Ashfield,...
Safety Advice Please take the time to carefully read through the whole of these instructions before you commence. Keep these instructions for future reference. Unpack, inspect and check off all of the contents. Please dispose of all packaging safely. Small component parts could choke a child if swallowed. We strongly recommend that you keep children well away from the work area.
Page 9
ATTENTION: Do not attach the third slat until the Desk has been correctly aligned in the following steps. With the wooden runners in place, slide the 2 plastic sliders to the front of the bunk and attach to the edge of the desk using 4 screws .
Page 10
Place the slats onto the side rail supports and distribute evenly using the spacer provided.
We’ve tried to make this piece of furniture as easy toassemble as possible. In the unlikely event that you have problems putting it together or have damaged or missing pieces, please contact our customer services on 01623 727374. Julian Bowen Limited Bentinck House, Park Lane Business Park, Kirkby-in-Ashfield, Notts, NG17 9LE - www.julian-bowen.co.uk...
Need help?
Do you have a question about the UP 10133 and is the answer not in the manual?
Questions and answers