JL Audio CR-1 Owner's Manual
  1. Manuals
  2. Brands
  3. JL Audio Manuals
  4. Crossover
  5. CR-1
  6. Owner's manual
JL Audio CR-1 Owner's Manual

JL Audio CR-1 Owner's Manual

Active subwoofer crossover
Hide thumbs Also See for CR-1:
Table of Contents

Advertisement

Quick Links

Download this manual
Active Subwoofer Crossover
Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR-1 and is the answer not in the manual?

Questions and answers

Related Manuals for JL Audio CR-1

Summary of Contents for JL Audio CR-1

  • Page 1 Active Subwoofer Crossover Owner’s Manual...

  • Page 2: Important Safety Instructions

    11) Nonuse Periods — e power cord of the device should be unplugged from the outlet when the device is le unused for long periods of time. | CR-1 Page 2...
  • Page 3 Precautions should be taken so that the grounding means of the device are not defeated. Defeating the grounding prong on the device power cord could increase the risk of electric shock and could result in permanent damage to the device’s electronics. | CR-1 Page 3...

  • Page 4: Table Of Contents

    INTRODUCTION ank you for purchasing a JL Audio CR-1 active subwoofer crossover. Your CR-1 has been designed in the U.S.A. by a passionate team of audio professionals with vast experience in signal processing and a complete commitment to “ahead of the curve” audio performance.

  • Page 5: Product Overview

    2-channel audio (via the CR-1’s bass management) and multichannel audio (via your pre-pro or receiver’s bass management). As you can see from this brief introduction, the CR-1 packs a lot of useful technology and functionality. Please read the following sections thoroughly to properly connect and set up your CR-1.

  • Page 6: Package Contents And Placement Considerations

    CR-1. We also do not recommend placing the CR-1 directly on top of a power ampli er or receiver, as the heat generated by those components could a ect the CR-1.

  • Page 7: Front Control Panel Layout

    Ground Lift Stereo Inputs Managed Bass Switch page 12 Inputs page 13 page 12 Fuse page 13 Balanced XLR/TRS Managed Bass Balanced XLR/TRS Managed Bass Input Type Stereo Inputs Inputs Switch page 12 page 12 page 12 | CR-1 Page 7...

  • Page 8: Front Panel Controls In Detail

    CR-1’s circuitry. e LED next to the power switch is unlit when the power is o . When the CR-1’s power switch is in the “on” ( ) position, the CR-1’s circuitry is activated and the LED next to the power switch will light up GREEN.
  • Page 9 “Crossover Slope” switch changes the attenuation slope of the high-pass and low-pass lters. CR-1 o ers a choice between a moderate 12 dB/octave (2nd order) and a steep 24 dB/octave (4th order) slope. A 24 dB per octave high-pass lter attenuates signals below its corner frequency at a rate of -24 dB for every halving of frequency.
  • Page 10 Subwoofers, or vice versa.) However, to maintain extreme circuit linearity in the CR-1, when you turn the Level Match Control to +2 dB on the Satellite side (i.e., turn up the Satellite level by 2 dB), the circuit actually cuts the Subwoofer output by 1 dB and raises the Satellite gain by only 1 dB, giving you the desired 2 dB di erence.
  • Page 11 Damping Controls ere are two “Damping” controls on the CR-1, one in the Subwoofer Section and another in the Satellite Section of the front control panel. is precision tuning feature allows you to compensate for loudspeaker response variations in e “Damping” controls work by altering the damping of the crossover region.

  • Page 12: Rear Panel Control And Connections In Detail

    CR-1 utilize Neutrik Combo XLR/ ® preampli er is powered and delivering signal at one time, the CR-1 will behave TRS Connectors. These connectors normally, although it may require some adjustment of the “Sub/Sat Balance” are designed to accept either type of balanced input connector.
  • Page 13 CR-1. ONLY use a three-prong (grounded) power cord with the CR-1. Use of a two-prong plug, or a “cheater plug” may result in damage to the CR-1, which would not be covered under warranty.

  • Page 14: Connection Scenarios And Diagrams

    “Main Stereo Inputs” of the CR-1 via balanced XLR cables. en, you can “Outputs to Satellites” are high-pass connect the CR-1’s “Outputs to Satellite Ampli er” to a stereo ampli er via ltered by the CR-1 balanced TRS cables, and then connect the CR-1’s “Outputs to Subwoofer(s)”...
  • Page 15 LEFT RIGHT BALANCED BALANCED LEFT RIGHT Stereo Ampli er Balanced Connection Unbalanced Connection LEFT LOUDSPEAKER RIGHT LOUDSPEAKER WARNING! TURN OFF THE CR-1 AND ALL OTHER EQUIPMENT IN THE WARNING SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS! | CR-1 Page 15...
  • Page 16 Le and Right speakers (not shared with the HT setup.) “Outputs to Satellites” are high-pass e subwoofer(s) will be shared between both systems, using the CR-1 as a switch ltered by the CR-1 to select the operating mode.
  • Page 17 BALANCED LEFT RIGHT Stereo Ampli er Balanced Connection DEDICATED 2-CH LOUDSPEAKERS Unbalanced Connection LEFT LOUDSPEAKER RIGHT LOUDSPEAKER WARNING! TURN OFF THE CR-1 AND ALL OTHER EQUIPMENT IN THE WARNING SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS! | CR-1 Page 17...
  • Page 18 HT receiver - OR - your stereo preamp, not both at once. If you accidentally turn “Outputs to Satellites” pass signals both on, the CR-1 will not be damaged, but it may sound very strange to hear directly from “Main Stereo Inputs”, both sources playing at the same time.
  • Page 19 FRONT LEFT & RIGHT SPEAKERS IN HOME THEATER MODE (”Crossover Function” switch in “Bypass” Position) LEFT LOUDSPEAKER RIGHT LOUDSPEAKER WARNING! TURN OFF THE CR-1 AND ALL OTHER EQUIPMENT IN THE WARNING SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS! | CR-1 Page 19...

  • Page 20: Setup Guides

    SCENARIO 1 SETUP GUIDE: 2-channel Subwoofer/Satellite System, Bass-Managed by the CR-1 Connect your CR-1 as shown in Scenario 1 Connection Diagram on page 15. For many 2-channel audiophiles, it is intuitive to select a very low crossover frequency, especially if the satellite (main) speakers are large and capable of good low frequency extension on their own.
  • Page 21 Next, defeat all signal processing on your subwoofer. In other words, turn o any on-board low-pass ltering and defeat any polarity or phase controls, and set the subwoofer’s Level control to the middle position. We will rst set the CR-1 and then tweak the subwoofer’s controls.
  • Page 22 CR-1’s Sub/Sat Balance control is intended for ne tuning rather than gross level o sets. First, you will set up the two-channel portion of the system, using the CR-1’s controls. Use the same settings and follow the exact same procedures listed in Setup Scenario 1 to set up this 2-channel mode.

  • Page 23: Setup Guides

    A stereo preampli er and the CR-1 will be added to the system to create a dedicated two-channel mode. Connect your CR-1 as shown in Scenario 3 Connection Diagram on page 19.

  • Page 24: Frequently Asked Questions

    1. Try plugging the CR-1’s power cord into a known-good AC power outlet. 2. If the above does not help, remove the Fuse cover on the rear of the CR-1 and see if the fuse is blown. If the fuse is blown, contact JL Audio’s Home Technical Support Dept.

  • Page 25: Limited Warranty / Service Information

    JL Audio for service. Cosmetic damage due to accident or normal wear and tear is not covered under warranty.

  • Page 26: Installation Notes

    INSTALLATION NOTES Use this diagram to document your CR-1’s inputs/outputs and switch/control positions. | CR-1 Page 26...
  • Page 27 | CR-1 Page 27...

  • Page 28: Features And Speci Cations

    P A N E L “JL Audio”, “Ahead of the Curve” and the JL Audio logo are registered trademarks of JL Audio, Inc. • ©2016 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 • Other U.S. & Foreign patents pending.

Table of Contents