Kit Parts; Installing Electrical Parts; Ecu Set (2Cr-8591A-71) - Yamaha YZF-R1 Kit Manual

2
Kit Parts
2-1 Installing Electrical Parts
1.

ECU Set (2CR-8591A-71)

Parts List
No. PART No.
1 2CR-8591A-71
2 2CR-2818Y-71
•
Use of this set and a wire har ness
included in the kit enables regulation (or
setting) of fuel injection and ignition timing,
etc.
•
For details as to how to regulate (or set)
fuel injection and ignition timings, etc.,
refer to the FI matching system manual in
the CD-ROM that comes with the set.
•
There are two types of basic control data
for the ECU included in this set: SB (Super
Bike) and ST (Stock Sports). They can be
switched over and vice versa. To make it
in the ST specification, just remove two
couplers located at the lower left of the kit
harness fuel tank.
(See the figure below.)
PART NAME
ECU
CD
NOTICE
Before using the KIT ECU for the first
time, use YMS to perform writing of the
base map.
– 2 –
Q'TY
1
1 YMS SOFT & MANUAL
'16 Ver.
<Setting-up Details>
SB specification: Kit cam shaft, Kit valve
spring, Kit air funnel set,
*Recommended muffler
ST specification: *Recommended muffler
* Recommended muffler
Made by Akrapovic (For details of the
specification, please access the website.)
Web http://www.akrapovic-exhaust.com/
REMARKS