Panasonic KX-HNK101 Operating Instructions Manual page 12

Setup
Installing the mounting bracket
Installing the mounting bracket on wooden walls
Line up the holes on the mounting bracket with the holes in the wall, then insert
and tighten each screw.
Note:
R Use the supplied screws (
R Place the bracket with the "UP" mark facing upwards.
Installing the mounting bracket on gypsum board, ALC (autoclaved
lightweight cellular concrete), or concrete blocks
Use the supplied anchors and screws to mount the mounting bracket to the wall.
Note:
R Supplied anchors ø: 5 mm ´ 25 mm (ø: 3/16 inches ´ 1 inch).
R Supplied screws ø: 4 mm ´ 25 mm (ø: 5/32 inches ´ 1 inch).
1
Mark the hole depth (
the hole.
R Use a 3/16 inch (4.8 mm) drill bit.
2
Remove debris.
12
HNK101_(en_es)_0618_ver.041.pdf
1
1
) on the drill bit at 35 mm (1 3/8 inches) and then drill
1
For assistance, please visit http://shop.panasonic.com/support
12
).
1
1
2015/06/18 20:12:06