Searched Target Of Search Window; Error Message List - Panasonic BB-HNP11A Operating Instructions Manual

Error message list

Message
There is insufficient free space on
the Save Destination Disk or Save
Destination Folder cannot be
accessed. Delete unnecessary
recorded images or confirm the
Save Destination Folder to be
accessed.
Specify a local drive. Although
mapping this folder to a network
drive allows you to specify this
folder, the program may not be
performed normally due to your
network environment, specifying a
network drive is not
recommended.
Select folder.
Set the alarm or sensor at Camera
Registration Information Window
or change the Recording Method
before you enable the Timer with
Alarm and Sensor.
Recording Method is not correct.
Change the Recording Method
before you enable the Timer.
This software disabled the timer
which has Alarm or Sensor that
has been replaced. Set the alarm
or sensor at Camera Registration
Information Window or change the
Recording Method before you
enable the Timer with Alarm and
Sensor.
Operating Instructions (Additional Features)
Cause and Remedy
• The destination free disk space is
insufficient. Can not access to the
destination drive
Follow the instruction message.
• Folders on the network could not be
specified as the folder.
Follow the instruction message.
• The [Select Folder] was checked in the
Searched Target of Search window, and a
folder is not selected.
Select a folder on the Browse for Folder
window to click [Browse].
• Though Alarm/Sensor Recording is not
selected on Camera Registration Information
window, tried to enable the Timer with Alarm
and Sensor.
Follow the instruction message.
• Invalid information has been set in the
Recording Method.
Follow the instruction message.
• Though the Timer with Alarm and Sonsor is
selected on Timer Registration Information
window, tried to disable Alarm/Sensor
Recording on Camera Registration
Information window.
Follow the instruction message.
13