Processing Guide - Kenwood HDP30 Instructions Manual

processing guide

food maximum
amount
Meat 250g
Herbs
Nuts 200g
Bread 1 slice
Hardboiled
eggs
Onions 200g
Mashers
important
Never use the masher in a saucepan
G
over direct heat. Always remove the
saucepan from the heat and allow to
cool slightly.
Do not tap the masher on the side of
G
the cooking vessel during or after
mashing. Use a spatula to scrape
excess food away.
For best results when mashing never
G
fill a saucepan etc., more than half
full with food.
A A
Plastic Masher (if supplied)
to use the masher
The masher can be used to mash
G
cooked vegetables such as
potatoes, swede and carrot.
Don't mash hard or uncooked foods
G
- you may damage the unit.
1 Cook the vegetables and drain.
2 Fit the masher collar to the masher
foot by turning in a clockwise
6
direction until it locks in position.
3 Turn the masher upside down and fit
the paddle over the central hub and
turn anti clockwise to secure
the collar is not fitted then
the paddle will not secure in
place).
4 Fit the power handle to the masher
assembly - push to lock.
5 Plug in.
6 Place the masher in the saucepan or
bowl etc.
TYPE HDP30 - press the on button.
TYPE HDP40 - select a low speed
on the variable control and then
press the on button.
approx. time
(in seconds)
10-15
30g 5-10
10-15
5-10
3 3-5
pulse
7
Move the masher in an up and down
G
movement throughout the mix until
the desired result is achieved.
7 After use release the on button and
unplug.
8 Press the blender shaft release buttons
to release the masher assembly.
9 Remove the paddle from the masher
by turning clockwise.
10 Unscrew the collar from the masher
foot.
B B
Metal Masherpro™ (if
supplied)
to use the masher
The masher comes with two screens
G
which can be used as follows:-
Coarse screen - to mash cooked
vegetables such as potatoes,
swede, yams and carrot.
Fine screen - to mash cooked or
soft fruits and vegetables.
Don't mash hard or uncooked foods
G
you may damage the unit.
1 Cook hard vegetables and fruit and
drain first before mashing.
2 Fit the masher collar to the masher
shaft by turning in a clockwise
direction until it locks in position
3 Fit either the coarse or fine screen to
the masher shaft – turn clockwise to
9
lock
4 Turn the masher upside down and fit
the paddle over the central hub and
turn anti-clockwise to secure
(If the collar is not fitted then
the paddle will not secure in
place).
5 Fit the power handle to the masher
assembly - push to lock.
. (If
6 Plug in.
7 Place the masher in the saucepan or
bowl etc.
TYPE HDP30 - press the on button.
TYPE HDP40 - select a low speed
on the variable control and then
press the on button.
Move the masher in an up and down
G
movement throughout the mix until
the desired result is achieved.
Increase the speed if required.
8 After use release the on button and
unplug.
6
.
8
.
bk
.