Programmed Play - Sanyo DC F200 Instruction Manual

Ejecting or replacing discs
1. While in the CD play or stop mode, press one of the disc select buttons
to be ejected, then press the OPEN/CLOSE button.
While the player is playing one disc, you can eject or replace
another disc without stopping play.
2. Remove or replace the disc.
3. Press the OPEN/CLOSE button.
Notes on handling compact discs
Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
Handle the disc by its edge. Do not touch the playing surface (glossy
side).
Fingerprints and dust should be carefully wiped off the playing surface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
Never use chemicals such as record cleaning sprays, antistatic
sprays or fluids, benzene or thinner to clean compact discs.
Temporarily stopping play
Press the PLAY/PAUSE button. "D" blinks on the display. To resume
play, press the button again.
Skip play
To skip to track 6 while track 3 is playing, press the >/ FW SKIP/
SEARCH button repeatedly until"6 appears in TRACK on the display.
To skip back to track 3 while track 6 is playing, press the !4+ /++ SKIP/
SEARCH button repeatedly until "3" appears.
The number buttons on the remote control can also be used for skip
play. To skip to track 6 while one track is playing, press O, then 6.
Search (forward/reverse)
If the >/ W or~< /4+ SKIP/SEARCH button is pressed during play,
the player will search at high speed in the forward or reverse direction
while the button is being pressed. When the button is released, normal
play will continue.
Random play
Press the RANDOM button on the remote control to begin random play.
The player will automatically select and play discs and tracks at random.
"RANDOM appears on the display.
Random play will not function during programmed play.
Repeat play
Press the REPEAT button on the remote control repeatedly to select the
desired repeat mode in the following sequence. The selected repeat mode
is shown on the display.
REPEAT: Repeat all tracks on the selected disc.
REPEAT CONT: Repeat all tracks on all discs.
Released: Normal play mode
Note:
During programmed play, "REPEAT CONT" can not be selected.
Changing discs during play
While the player is playing one disc, press one of the disc select buttons
to skip to another disc. '(CH dlSC blinks for a few seconds, then the
selected disc moves into playing position.
Play starts automatically from the first track on the disc.
PROGRAMMED PLAY
Up to 24 selections, from up to 3 discs, can be programmed for play in any
order.
To begin the programming procedure, select "CD function first.
The discs or tracks must be programmed in the stop mode.
- The same disc or track can be programmed more than once.
Follow the example below to programme tracks 6 and 2 on DISC 1 and all
tracks on DISC 3. In this example, each disc has 9 tracks and DISC 3 is
in playing position.
1.
2.
3.
4.
5.
6.
7.
8
9
Press the MEMORY button.
\l/
o
AL
prm , _
s
'RACK
Select disc 1 by pressing the DISC 1 button.
The DISC SELECT button on the remote control can also be used.
~
Select track 6 by pressing the F-/ N SKIP/SEARCH button.
The number buttons on the remote control can also be used.
~ TRACK
e
Press the MEMORY button. "PROG." remains lit.
Select track 2 by pressing the 14</++ SKIP/SEARCH button
g
'RA2
\l/
prm * _
o
Press the MEMORY button. "PROG." remains lit.
Select disc 3 by pressing the DISC 3 button.
Press the MEMORY button. "PROG." remains lit.
Press the PLAY/PAUSE button to start play.
~
When all programmed selections have been played, the player stops
automatically. "0 0.00 appears on the display.
The programme contents are retained in memory.
Any attempt to programme more than 24 selections will result in
"FULL" being displayed and discontinuation of the programming.
If a non-existent disc or track number is programmed, that disc or track
will be skipped during play.
The programme is cleared in the following cases:
When the STOP button is pressed in the stop mode
When the OPEN/CLOSE button is pressed