Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 50

Configuration
50
Siemens AG
The DVR can be set to react to text input. Text input can be associated with cameras,
trigger an Alarm-Out connector, sound the DVR's internal buzzer, notify a number of
different devices, and/or move PTZ cameras to preset positions.
1. Highlight the box under the Record heading and press the
Î A list of cameras appears.
You can associate as many cameras with the Text Input as you wish. If the
DVR detects text input, it starts recording video from all the associated cameras.
NOTE
For the Record action, the camera you select should be set to the Event or Time & Event recording
mode in the Record Schedule setup screen.
2. Highlight the box under the Alarm-Out heading and press the
3. Select between Alarm Output and Beep (DVR's internal buzzer) that you would
like to activate and to sound whenever the DVR detects text input.
NOTE
For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
4. Highlight the box under the Notify and press the
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the
5. Highlight OK and press the
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
6. Highlight the desired box under the PTZ heading, and press the
Î
A list of PTZ presets appear.
7. Select the preset positions for each PTZ camera, where you want PTZ cameras
to move to when the DVR detects text input.
Î
You can save your Text-In changes by highlighting Save and pressing the
button.
Î Selecting Cancel exits the screen without saving the changes.
button.
button.
button to accept your changes.
button.
button.
button.
06.2010