1. Important • Please use approved power cord provided 1. Important by Philips at all times. If your power cord is missing, please contact your local service This electronic user’s guide is intended for center. (Please refer to Customer Care anyone who uses the Philips monitor.
1. Important • Temperature: 0-40°C 32-104°F 1.2 Notational Descriptions • Humidity: 20-80% RH The following subsections describe notational Important information for Burn-in/Ghost conventions used in this document. image Notes, Cautions and Warnings • Always activate a moving screen saver Throughout this guide, blocks of text may be program when you leave your monitor accompanied by an icon and printed in bold or unattended.
WEEE performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible,...
2. Snap in the base in the VESA mount area. 使用 前请阅读使用说明 User’s Manual 保留备用 Monitor drivers Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. * DVI * VGA * Audio...
Page 7
2. Setting up the monitor 3. Hold the base with both hands. (1) Gently attach the base to the column until the three guiding pins rest into the position holes. (2) Use your fingers to tighten the screw located at the bottom of the base, and secure the base to the column tightly.
Page 8
2. Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back of 240B4LPYN the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
2. Setting up the monitor 2.2 Operating the monitor SmartImage hot key. There are 6 modes to select: Office, Photo, Description of the control buttons Movie, Game, Economy, Off. 240B4LPYN 240B4LPYC Switch monitor’s power ON and OFF. Access the OSD menu. Confirm the OSD adjustment.
Page 10
On-Screen Display. You can use this as a On-Screen Display (OSD) is a feature in all reference when you want to work your way Philips LCD monitors. It allows an end user to around the different adjustments later on. adjust screen performance or select functions...
Page 11
2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 1920 × 1200 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1200 @ 60 Hz for best results.
2. Setting up the monitor 3. While keeping the release button pressed, 2.3 Remove the Base Assembly for tilt the base and slide it out. VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.
This mode significantly How does it work? enhances readability and productivity when SmartImage is an exclusive, leading edge Philips you’re working with spreadsheets, PDF files, technology that analyzes the content displayed scanned articles or other general office on your screen.
3. Image Optimization • Economy: Under this profile, brightness, contrast are adjusted and backlighting finetuned for just right display of everyday office applications and lower power consumption. • Off: No optimization by SmartImage. 3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up...
4. PowerSensor™ step up signal strength when wearing black 4. PowerSensor™ or other dark grab. How does it work? Hot key Sensor distance (for selected models only) • PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user- presence.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type TFT-LCD Backlight Panel Size 24" W (61cm) Aspect Ratio 16:10 Pixel Pitch 0.270 x 0.270 mm SmartContrast 20,000,000:1 Response time 5ms (GTG) Optimum Resolution 1920 x 1200 @ 60Hz Viewing Angle (typ.) 170°...
Page 17
5. Technical Specifications AC Input Voltage AC Input Voltage AC Input Voltage Heat Dissipation* at 100VAC , 50Hz at 115VAC , 60Hz at 230VAC , 50Hz Normal Operation 75.09 BTU/hr 75.09 BTU/hr 75.09 BTU/hr Sleep (Standby) 1.02 BTU/hr 1.02 BTU/hr 1.02 BTU/hr Off (AC switch) 0 BTU/hr...
Page 18
Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the...
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Regulatory Infomation environmental management system (EMAS 7. Regulatory Information or ISO 14001) • Very low energy consumption both in TCO Certified Edge onand standby mode minimize climate Congratulations, impact Your display is designed for both • Restrictions on chlorinated and brominated you and the planet! flame retardants, plasticizers, plastics and The display you have just purchased carries the...
Page 22
RoHs directive mandating restrictions requirement of Information Technology on hazardous substances in electrical and Equipment). electronic equipment have been adhered to in order to make Philips monitors safe to use • EN55024:2010 (Immunity requirement of throughout its life cycle. Information Technology Equipment).
Page 23
7. Regulatory Infomation • MPR-II (MPR:1990:8/1990:10 Low Changes or modifications not expressly Frequency Electric and Magnetic fields). approved by the party responsible for compliance could void the user's authority Energy Star Declaration to operate the equipment. (www.energystar.gov) Use only RF shielded cable that was supplied ®...
Page 24
7. Regulatory Infomation EN 55022 Compliance (Czech Republic Only) Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de Polish Center for Testing and Certification...
Page 25
7. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht Placering/Ventilation den in der "Verordnung über den Schutz vor VARNING: Schäden durch Röntgenstrahlen" festgelegten FÖRSÄKRA DIG OM ATT HUVUDBRYTARE Vorschriften. OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
Page 26
For more information about where you can drop off your waste equipment for recycling in India please visit the below web link. http://www.india.philips.com/about/sustainability/ recycling/index.page...
Page 27
7. Regulatory Infomation How to connect a plug China RoHS The wires in the mains lead are coloured in The People's Republic of China released a accordance with the following code: regulation called "Management Methods for Controlling Pollution by Electronic Information BLUE -“NEUTRAL”(“N”) Products"...
No manufacturer can guarantee the types of bright dot defects. that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.
Page 30
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
8. Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region:...
Disconnect the monitor from mains power after you have tried these solutions, contact source immediately for safety Philips customer service representative. • Contact with Philips customer service representative immediately. Common Problems Imaging Problems No Picture (Power LED not lit) Image is not centered •...
9. Troubleshooting & FAQs Image appears blurred, indistinct or too dark For further assistance, refer to the Consumer Information Centers list and contact Philips • Adjust the contrast and brightness on customer service representative. On-Screen Display. An "after-image", "burn-in" or "ghost image"...
Page 36
Can I connect my LCD monitor to any no pressure or force applied to the PC, workstation or Mac? panel surface side. This may affect your warranty conditions. Yes. All Philips LCD monitors are fully Ans.: compatible with standard PCs, Macs Q7: H ow should I clean the LCD surface? and workstations.
Page 37
9. Troubleshooting & FAQs Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in"...