Card Functions Screen; Other Functions Screen - Panasonic AG-HVX200AP Operating Instructions Manual

CARD FUNCTIONS screen

Display
Item
mode
SCENE FILE (Camera) You can save four SCENE FILE settings to the SD memory card, and can also
P2
USER FILE (Camera) You can save four file settings (excluding SCENE FILE) to the SD memory
P2
SD CARD FORMAT (Camera) Formats the SD memory cards.
P2

OTHER FUNCTIONS screen

Display
Item
mode
REMOTE (Camera)
TAPE
P2 (MCR/
VCR)
1394 CONTROL (Camera) Sets the control method for backup recording using a backup unit connected to
TAPE
P2
1394 CMD SEL (Camera) Sets how the START/STOP button works for the backup unit.
P2 TAPE
title the saved files.
READ: Read
WRITE: Write
card, and can also title the saved file.
READ: Read
WRITE: Write
Sets the operations of the supplied remote control unit. (Remote control setup
(Page 19))
VCR1:
Accepts commands from the remote control set for VCR1.
VCR2:
Accepts commands from the remote control set for VCR2.
OFF:
Operations are not accepted from any remote control.
the 1394 terminal.
OFF:
The backup unit is not controlled.
EXT:
The backup unit can be controlled by the START/STOP button. The images
shot by the camera recorder are recorded by the backup unit. Note that the
camera recorder does not record them.
BOTH:
The images shot by the camera recorder are recorded by both the camera
recorder and backup unit.
CHAIN:
When the camera recorder's media approaches its end during shooting, the
backup unit in the recording stand-by mode automatically starts recording
images.
REC_P:
This switches between recording and pause.
STOP:
This switches between recording and stop.
<Note>
If the backup unit does not have a rec pause function, select STOP.
Description of settings
Description of settings
indicates the factory setting.
115