Activating Con@Ctivity 2.0; Installing The Con@Ctivity 2.0 Dongle; Activating The Rangehood - Miele DA 6700 D Operating And Installation Instructions

Activating Con@ctivity 2.0

Installing the Con@ctivity 2.0
dongle
In order for the Con@ctivity 2.0 function
to be used, the cooktop must be fitted
with the Con@ctivity dongle.
 Please read the instructions for the
Con@ctivity 2.0 dongle before
installation.
Activating Con@ctivity 2.0
In order to use the Con@ctivity 2.0
function, radio contact between the
cooktop and the rangehood must be
activated.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the rangehood and the cooktop at
the same time. Activation on the
rangehood is described below.
Activation on the cooktop is described
in the relevant Operating instructions.
Please refer to the Operating
instructions before starting.
Activate the rangehood first, then the
cooktop.
36

Activating the rangehood

 The cooktop and rangehood must be
switched off.
 Touch the run-on option control
515 for approx. 10 seconds, until 1
lights up in the fan power setting
display.
 Then touch in turn,
– the 1 control,
– then the IS control,
– then the lighting control .
The rangehood is now in signing on/off
mode.
If a wireless connection has not yet
been established, 2 and 3 will flash at
the same time.
If a wireless connection has already
been established, 2 and 3 will light up
constantly (Con@ctivity 2.0 is already
activated or a remote control is signed
on).
 Touch the IS control to activate
Con@ctivity 2.0.
The search for a signal will start.
 Meanwhile, start the activation of the
cooktop.