Siemens Gigaset A580 IP User Manual page 156

No firmware update or VoIP profile download is carried out.
1. If
Not possible, try later.
update is already being carried out.
¥
Repeat the process at a later time.
2. If is displayed, the firmware or profile file may be invalid.
File corrupt
¥
Please only use firmware and downloads that are made available on the precon-
figured Gigaset configuration server (
www.gigaset.com/customercare.
3. If
Server not available
¥
The server is currently not accessible. Repeat the process at a later time.
¥
You have changed the preconfigured server address (
address. If necessary, reset the base station.
4. If Transmission error XXX
the file. An HTTP error code is displayed for XXX.
¥
Repeat the process. If the error occurs again, consult the Service department.
5. If Please check IP settings
net.
¥
Check the cable connections between the phone and router and between the
router and the Internet.
¥
Check whether the phone is connected to the LAN, i.e. it can be reached at its IP
address.
You cannot listen to or control a network mailbox.
VoIP:
Your VoIP provider does not support the type of DTMF signalling set up on your phone.
¥
Ask your VoIP provider which signalling it supports and change the settings on your
£
phone ( Page 137) if necessary.
When operating the base station within a PABX:
Your PABX is set for dial pulsing.
¥
Set your PABX to tone dialling.
No time is specified for a message in the calls list.
Date and time have not been set.
¥ £
Set date/time ( Page
¥
Activate base station synchronisation with a time server on the Internet
£
( Page 150).
is displayed, the VoIP connections may be busy or a download/
£
is displayed, the download server may not be accessible.
is displayed, an error has occurred during the transmission of
is displayed, your phone may not be connected to the Inter-
14) or
Customer Service (Customer Care)
Page 148) or at
£
Page 148). Correct the
155