EcoWater ECR 3500R20 Owner's Manual page 9

ECOWATER
S Y S T E M S
Display
E.A.S.E. SELECT
Port
SETUP PROCEDURE
When the EcoWater Systems conditioner/refiner is
plugged in for the first time, a beep sounds and the dis-
play briefly shows a logo, followed by model informa-
tion. Next, a series of "wizard" screens prompts you to
enter basic operating information:
1. LANGUAGE If the desired language already has a
black dot next to it (See Figure 8), go to Step 2.
Otherwise, press the conditioner/refiner's DOWN (6)
or UP (5) buttons to scroll to the desired language,
then press the SELECT (¡) button to choose it.
2. Press the SELECT (¡) button to advance to the next
"wizard" screen.
NOTE: Wireless Setup can also be done after the rest
of the Setup Procedure (Steps 16-28) has been
completed. From the Main menu, go down to
the Advanced settings menu and select
Wireless setup.
3. WIRELESS SETUP Choose how you will connect
the softener to your home's wireless network:
Browser: You can connect using the browser on your
laptop, tablet or phone. Skip to Step 7.
Pushbutton: If your wireless router has a WPS (Wi-
Fi Protected Setup) or Push to Con-
nect button, you can use this method to
connect. Proceed to Step 4.
LEFT UP RIGHT
Button Button Button
DOWN
FIG. 7
Button Button
FIG. 8
FIG. 9
OR
Setup Procedure for Wi-Fi Systems
Pushbutton (WPS) Option
4. Use the SELECT (¡) button to choose Pushbutton
(WPS). The softener display will change to show
"Push wireless router button".
5. Press the WPS or Push to Connect button on your
router and wait for a minute or two to see if the dis-
play changes again to "Connected" and gives you a
key code. If not, you may need to cancel and use
the browser option.
6. Once the key code is displayed, write it down. It will
be used when you register your system on the Eco-
Water web site. Proceed to Step 16 on the next page.
NOTE: If the "Connected" message shows "- - - - - -"
(dashes) instead of a key code, it may be that
your router is not connected to the internet.
Verify that the router's internet connection works
with your laptop or other device.
Browser Option
7. Press the conditioner/refiner's DOWN (6) button to
scroll to Browser.
8. Press the SELECT (¡) button twice. The softener
display will change to show "See connection instruc-
tions".
9
FIG. 10
FIG. 11
FIG. 12
FIG. 13
continued on the next page