Network Camera Monitoring; Using The Operation Bar - Panasonic BB-HNP60 Operating Instructions Manual

2.3 Network Camera Monitoring

2.3.1 Using the Operation Bar

Buttons will not be displayed if [Panasonic HCM series without Pan/Tilt] is
*1
selected for Camera Type on Edit Camera window. They also cannot be controlled
if [Disable] is selected on Camera Setup window in Network Camera.
Buttons apply only to Network Camera with zooming and focusing feature. They
*2
will be displayed when selecting [Panasonic HCM series with Zoom] for Camera
Type on Edit Camera window. (
Pan/Tilt Scan buttons
horizontally (left and right) or vertically (up and down) all over and
the lens returns to the current position.
Horizontally
Pan/Tilt/Home Position buttons
with Pan/Tilt feature): Operates the direction of Network Camera.
Pan ( : Left,
Home Position (
Preset buttons
*1
Zoom buttons
*1*2
Focus buttons
*1*2
Brightness: Brightness control has nine levels including
STD (Standard).
[-]: Darkens the image. [STD]: Standard. [+]: Brightens the image.
Resolution: Selects resolution.
[640 x 480], [320 x 240] (default), [160 x 120]
Image Quality: Selects image quality.
• [Clarity]: Optimizes the image quality (the motion will slow
down).
• [Standard]: The standard performance (default).
• [Motion]: Optimizes the motion (The image will be not clear).
Pan/Tilt Scan buttons move the lens
*1
Vertically
*1
: Right) Tilt (
: Home Position)
( page 42)
( page 43)
( page 43)
page 36)
Operating Instructions
(Only the Network Camera
: Up, : Down)
41