Table of Contents
Advertisement
Honeywell
TH5110DNon-programmable
Thermostat
APPLICATION
The TH511OD Non-programmable
Thermostat provides
electronic control of 24 Vac, single-stage heating and
cooling systems or 750 mV heating systems. See Table 1
for a description.
Table 1, TH5110D Thermostat description.
Feature
Description
Powering Methods
•
Battery only
•
Common wire only
•
Common wire with battery backup
System Types (Up to 1 Heat, 1 Cool)
Gas, oil or electric heat with air conditioning
Warm air, hot water, high efficiency furnaces, heat pumps, steam
and gravity
Heat only-- includes power to open and power to close zone valves
(Series 20) and normally-open zone valves
Heat only with fan
Cool only
750 mV heating systems
Changeover
Manual or auto changeover selectable
System Setting
Heat-Off-Cool-Auto
Fan Setting
Auto-On
MERCURYNOTICE
tf this control is replacing a control that contains
mercury in a sealed tube, do not place your old
control in the trash.
Contact your local waste management authority
for instructions regarding recycling and the
proper disposal of the old thermostat.
¢_) U .S. Registered
Trademark
Copyright
© 2004 Honeywell
International
inc. ° _
• AN Rights Reserved
69-171211
Advertisement
Table of Contents
Need help?
Do you have a question about the th511od and is the answer not in the manual?
Questions and answers