Panasonic AG-HPX170P Operating Instructions Manual page 54

Using scene files (continued)

When the screen shown below appears,
use the Operation lever to enter a -
character file name.
Set the same as user information. (Page 61)
• Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./
When the filename has been set, you can
erase all characters using the RESET button
on the camera or the remote control.
BARS SHUTTER SPEES SELECT
CH1 SELECT CH2 SELECT INPUT1
INT(L) INT(R) ON
INPUT1 INPUT2
OFF
INPUT2
MIC POWER+48V
AUDIO
COUNTER RESET/TC SET ZEBRA
LCD EVF DTL
Camera or Remote control
PUSH MENU TO RETURN
7
After you finish setting the filename, press
the MENU button.
8
Push the Operation lever in the r direction
to select LOAD/SAVE/INIT.
SCENE FILE F1:
LOAD/SAVE/INIT
OPERATION TYPE
FRAME RATE
SYNCRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
CHROMA LEVEL
PUSH MENU TO RETURN
9
Press the Operation lever, push it in the r
direction to select SAVE and press it again.
SCENE FILE F1:
LOAD/SAVE/INIT
OPERATION TYPE
FRAME RATE
SYNCRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
CHROMA LEVEL
PUSH MENU TO RETURN

INPUT2
ON DATE/
OSD TIME
OFF
COUNTER RESET
REC
OIS
MULTI/
P-IN-P REC
WFM
/REW PLAY
NAME EDIT
SW POSITION F1
+/– : PUSH q / g
SEL : PUSH t / y
–– – –
VIDEO CAM
DEFAULT
1/48.0
0
0
0
0
–– – –
LOAD
SAVE
INITIAL
0
0
0
0
10
Press the Operation lever to select YES
when the screen shown below appears.
(To return to the menu level above, press the
MENU button.)
START/
PHOTO
STOP
SHOT
TITLE
ZOOM
A.DUB
The message below appears, and the changes to
FF/
the scene file are complete.
11
Press MENU twice to exit the menus.
• To return to a previously saved setting after a
change in scene file settings, select LOAD in step
9 and do steps 10 and 11.
• To return the scene file settings to the factory
settings, select INITIAL in step 9, then do steps
10 to 11.
SCENE FILE F1:
SAVE?
YES –––  PUSH STILL
NO
PUSH MENU TO RETURN
SAVE
PROCESSING...

SAVE
COMPLETED !