Card Management; Formatting An Sd Card - Panasonic A 8200 orUF SDR-S10 Operating Instructions Manual

Editing

Card management

Formatting an SD card

This is for initializing cards.
Please be aware that if an SD card is
formatted, then all the data recorded
on the card will be erased. Store
important data on a computer, etc.
We recommend using MotionSD
STUDIO etc. to acquire data recorded on
this unit. (l 78)
1
Press the MENU button, then
select [SETUP] #
[FORMAT CARD] # [YES] and
then press the cursor button
in the centre.
2
When the confirmation
message appears, select
[YES], then press the cursor
button in the centre.
≥ When formatting is complete,
press the MENU button to exit the
message screen.
≥ Use this unit to format SD cards. If an
SD card is formatted on other products
(such as a computer), the time spent
for recording may become longer and
you may not be able to use the SD
card.
70
VQT1E14
≥ Depending on the type of SD card
being used, it may take time to format.
≥ During formatting, do not turn this unit
off.
≥ When you format the SD card, use a
battery with sufficient battery power or
the AC adaptor.
≥ Do not open the card/battery door
while formatting.