How To Configure The Management Lan; Table 1.5 Parts Of The Management Lan Configuration - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 1 Network Environment Setup and Tool Installation
1.3 Management LAN
- show access_control
show date
show timezone
show gateway
show http
show http_port
show https
show https_port
show ssh
show ssh_port
show telnet
show telnet_port
show ip
show network
show exit_code
ping
who
netck arptbl
netck arping
netck ifconfig
netck stat
show user_list
help
show snmp sys_location
show snmp sys_contact
show snmp community
show snmp trap
show maintenance_ip
*5 SSH connection to standby MMB is not supported.
IP address of the management LAN (partition)
To the partition side, an IP address of the management LAN must be assigned to communicate with SVS
running on the operating system from the terminal on the management LAN. The IP address is assigned to
the LAN port on the IOU or the PCI_Box mounted on the network card. Also, for monitoring with SVOM, an IP
address must be assigned to the management LAN.
When it is linked with PRIMECLUSTER, the SVS on the partition side communicates with the user port of the
MMB via the management LAN. It also provides the function for monitoring the status of the cluster node and
the node switching function.

1.3.2 How to configure the management LAN

The network for MMB access from external terminals is the management LAN.
For management LAN-related settings for MMB access, use the CLI or the [Network Configuration] menu in
the Web-UI. For details on the network configuration, see
The following lists the settings for the management LAN configuration. Only a user with Administrator
privileges can make management LAN-related settings.
Display/Setting item
Network Interface: IP address and other settings for MMB access
Virtual IP Address
MMB#0 (MMB#1) IP Address
(*1)
DNS (optional)
Management LAN

TABLE 1.5 Parts of the management LAN configuration

Virtual IP address. In a dual MMB configuration, the IP address is overtaken
during MMB switching.
Host Name/IP Address/Subnet Mask/Gateway Address
Physical IP address of MMB#0 (MMB#1). You set this IP address for MMB#0
(MMB#1) mounted in the system.
Enable/Disable setting
Interface Name/IP Address/Subnet Mask/Gateway Address
Option. It specifies the IP address of the DNS server used. The default is
'Disabled'. Enable/Disable setting
IP Address: DNS Server 1/DNS Server 2/DNS Server 3
Specifies duplication of the management LAN ports. The default is
'Disabled'. (Only the ports on the #0 side are enabled.)
1.1 External Network
Description
7
Configuration.
CA92344-0537-08