Allen + Roth 18302-000 User Manual page 4

ASSEMBLY INSTRUCTIONS
1. Install the mounting bracket (A) to the
junction box (not included) by using junction
box screws (AA).
Hardware Used
Junction Box
AA
Screws
2. Insert fixture assembly (C) into canopy (F) and tighten
hexagon nuts (E) securely.
Attach the stems (G) to the fixture assembly (C).
3. Make electrical connection using wire
connectors (BB).
Refer to ELECTRICAL CONNECTIONS on page 3
for wiring directions.
Hardware Used
BB
Wire Connector
4. Align the screw holes on the mounting bracket (A)
with holes on the fixture assembly (C).
Secure the mounting bracket (A) onto
the canopy (F) with canopy screws (B).
Position the adjustable arms of the fixture assembly (C)
into the desired position.
Mark the location of the stems (G) on the ceiling.
For drywall ceiling installation, use plastic anchors (CC)
and wood screws (EE).
For wood joist installation, use only wood screws (EE).
Install the ceiling support stem bushing (DD)
at the marked locations.
Secure the stems (G) to the ceiling support stem
bushing (DD).
Hardware Used
CC
Plastic Anchor
Ceiling Support
DD
Stem Bushing
Wood Screw
EE
1
x 2
F
2
3
BB
x 3
.
4
B
x 2
x 2
x 2
4
A
C
B
CC
EE
F
G
C
Lowes.com/allenandroth
AA
G
E
F
CC
G
A
DD
EE
G
F
C