Panasonic DP-2000 Operating Instructions Manual page 72

Installation and Configuration (Windows 2000)
Output Tray
Specify the output destination. <Auto Selection, Outer, Inner 1, or Inner 2>
Note 1) Output Tray selection is allowed only with the Dual-Path Exit Guide Unit, Paper Transport Unit,
Exit Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.
Note 2) Post card cannot be output from the outer tray.
Secure Print
Select to enable Security Print.
Halftone Color Adjustment
• Contrast
Adjust the contrast of the printing image.
• Brightness
Adjust the lightness of the printing image.
• Dark Picture
Check to print a dark image into light image.
• Negative
Check to print in reverse.
• Input RGB Gamma
Adjust the gamma (strength of colors) in the printing image. Red, green and blue colors can be
individually adjusted.
• Black Ref/White Ref
Adjust the difference between the darkest color and the lightest color in an image. Increasing the black
ref value or decreasing the white ref value strengthens the contrast of an image, narrowing the range of
middle colors in the meantime.
• Picture
Select a test pattern.
Checking the checkboxes displays results of halftone adjustments on the test pattern.
72