Object Functions - Kenwood TH-D74A User Manual

OBJECT FUNCTIONS

Setting the Object Information.
1 Access Menu No. 516.
2 Select [Object1], [Object2], or [Object3] and press [ENT].
• When you press [A/B], the <
on the right side of the object item, showing the current
used information.
Object Name
3 Enter the Object Name and press [ENT].
Transmission format type
4 Select the type and press [A/B].
[Live Object]: Enabled object information
[Killed Object]: Disabled object information
[Live Item]: Enabled item information
[Killed Item]: Disabled item information
Note:
◆ The object time stamp information is embedded for the purpose
of overwrite protection of information by other APRS stations,
but they are not embedded time stamp information in the item.
In general, the item is used, for example, notification of the
temporary point not high degree of importance in comparison
with the object.
Transmission interval control
5 Select the Method and press [A/B].
[Off]: Does not send the object information.
[Temp.]: Send after 15 seconds, 30 seconds, 1 minute,
2 minutes, 4 minutes, 8 minutes,16 minutes, then stop
sending.
[Auto(15min)]: Send in 15 minute intervals
[Auto(30min): Send in 30 minute intervals
> indicator appears
14-15
Latitude/Longitude
6 Enter a Latitude and Longitude and press [A/B].
Icon
7 Select the icon and press [A/B].
Comments
8 Enter the Comments and press [ENT].
9 Press [A/B].
Setting the Object Information
1 Press [F], [BCN] to send the Object Information.
• < > appears on the display.