Hahn HF-600 Installation Instructions Manual

Advertisement

Quick Links

Whole House Water Filter
Installation Instructions
MODEL HF-600

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HF-600 and is the answer not in the manual?

Questions and answers

Kelly Pecorella
April 23, 2025

What is the size/diameter of the prefilter replacement o ring?

Subscribe to Our Youtube Channel

Summary of Contents for Hahn HF-600

  • Page 1: Whole House Water Filter

    Whole House Water Filter Installation Instructions MODEL HF-600...
  • Page 2 The HF-600 Whole House System is NSF Certifi ed to reduce chlorine. HF-600 DIRECTION OF FLOW 27" 48" Shut-Off Valve 5-Micron Pre-Filter Contents These items included with standalone systems All installation components included. 5-Micron Pre-Filter Unit HF-600 Install Kit: 4 – 2 Unions 1 –...
  • Page 3: Specifications

    Installation Instructions 1. KEEP THE UNIT IN AN UPRIGHT POSITION AT ALL TIMES. 2. Remove the red shipping caps from the inlet & outlet ports on the main housing. 3. Precondition the unit by “surge flushing”: It is very important that this system is flushed properly prior to final installation.
  • Page 4 6 years. Unions are located on each side of the tank for ease of replacement. It is not necessary to contract a plumber. The replacement part number is HF-600-R — available at hahnfiltration.com. Specifications...
  • Page 5 (888) 245-3114 to discuss your specific needs. 7. Installation of the system must comply with existing state and local plumb- ing codes. Hahn is not liable for consequential or incidental damages due to improper installation. 8. When cleaning – use only warm, soapy water to clean the outside of the hous- ing.
  • Page 6 Clean water throughout your home, while extending the life of your appliances by reducing sediment and scaling. * Scale reduction not NSF Certified...
  • Page 7 Code and a full refund will be promptly issued upon return. Thank you for choosing HAHN Filtration! This filter system is designed and tested for use with genuine HAHN Filtration parts, including replacement filters and all hardware. Use of parts from other manufacturers may result in loss of contaminant reduction performance, system damage or failure.
  • Page 8 System Tested and Certified by NSF International against NSF/ANSI Standard 42 for the reduction of the claims specified on the Performance Data Sheet as verified and substantiated by test data at www.nsf.org Manufactured by Sink Warehouse, LP 4601 Spicewood Springs Rd, Suite 1-100, Austin, Texas 78759 (888) 245-3114 www.hahnfiltration.com •...

Table of Contents