Table of Contents
Advertisement
Most cordless phone problems can be corrected quickly and easily — without
service. If you experience
difficulties, try the suggestions
below before taking your
phone in for service.
If the phone doesn't
work at all
I
Security code may have been cancelled. To reset, see page 7.
I
AC adaptor may not be plugged into a wall outlet or to the base station.
I
Telephone
line may not be connected.
I
Handset
battery
maybe
extremely
low. If
BATT LOW indicator lights in talk
mode, recharge battery. (See page 16.)
I
Handset may be too far from base station. Move closer.
The operating
range seems shorter
I
Check the base station location for interfering objects. (See page 4.)
1
Extend base station antenna to full length.
Handset battery life or standby time seems shorter
I
Batteries may not be fully charged, due to dirty contact points. Wipe with a soft
cloth.
I
Handset batteries may have been repeatedly
recharged before being fully
exhausted.
Try Battery Refresh (See page 16).
1 Battery may need replacing (See page 16.)
Incoming
calls do not ring on handset
1
Handset may be too far from base station. Move closer.
Reception
is noisy (interference,
humor
static)
I
Switch to clearer channel. (See page 7.)
1 Base station may be too close to electrical equipment.
Try another location.
1 Handset may be too close to large metal object(s). Move to another location,
or change direction while using handset.
I
Lower base station antenna.
If phone still does not work
1 Reset base station and handset as follows:
1. Disconnect AC adaptor, and then reconnect AC adaptor to reset base
station.
2. Disconnect then reconnect the handset battery.
3. Reset security code. (See page 7.)
1AD6P1 P041 8-G
(NZ)
SANYO Electric Co., Ltd.
Printed in Malaysia
Advertisement
Table of Contents
