Operational Control Locations; Power Take Off (Pto) Switch (A); Ignition Key Switch (B); Throttle (C) - Ventrac 4100 Operator's Manual

O C
PERATIONAL ONTROL
The images on the previous page match with ref-
erence letters as shown below to help identify the
locations of operational controls for this power unit.
A - PTO Switch
B - Ignition Key Switch
C - Throttle
D - Volt Gauge
E - Tachometer/Hour Meter
F - Engine Oil Pressure Warning Light
G - Seat Belt Light
H - Light Switch
I - 12 Volt Switch (On/Off)*
J- 12 Volt Switch (Momentary On/Off/On)*
K - Choke
L - Selector Lever/Parking Brake
M - Belt Tension Lever
N - Front Hitch Latch Lever
O - Front Hitch Lock
P - Seat Slide Adjustment Lever
Q - High/Low Range Shift Handle
R - Weight Transfer*
S - Fuel Shut-off Valve
T - Primary S.D.L.A. Control
U - Secondary S.D.L.A. Control
V - Foot Pedal*
W - 12 Volt Rear Outlet & 4-Pin Socket*
X - 3pt Hitch Control Handle*
Y - Left Rear Auxiliary Hydraulics Handle*
Z - Right Rear Auxiliary Hydraulics Handle*
AA - Auxiliary Hydraulic Quick Couplers
BB - 12 Volt 4-Pin Socket*
CC - Electric PTO Remote (5-Pin Socket)*
DD - Seat Latch (See page 18)
EE - Seat Prop (See page 18)
FF - Seat Lock Lever* (See page 18)
* Optional Equipment
OPERATIONAL CONTROLS
L
OCATIONS
Operation - 19
P T O (PTO) S
OWER AKE FF
Depressing the top of the PTO switch engages the
electric clutch to provide power to the front attach-
ment. Depressing the bottom part of the switch will
disengage the clutch and apply the clutch brake to
stop the attachment. Note: The PTO will shut off
automatically if the operator leaves the power unit
seat. To restart, fi rst return to the seat, then disen-
gage and re-engage the PTO switch.
I K S
GNITION EY WITCH
1. Off or Stop Position - All 12 volt power going
through the key switch is off.
2. On or Run Position - Engine run position.
3. Start - When key is turned to the start position,
starter will engage.
T (C)
HROTTLE
Moving the lever forward increases the engine
Revolutions Per Minute (RPM). Moving it back slows
the engine to an idle.
V G (D)
OLT AUGE
Displays the voltage level of the charging system.
T & H
ACHOMETER OUR
When the engine is running, the engine RPM is dis-
played. When the engine is not running, the engine
run time in hours is displayed.
E O P
NGINE IL RESSURE
Signifi es low or no engine oil pressure.
S B L (G)
EAT ELT IGHT
Light indicates when seat belt is not in use. When
seat belt is fastened, the light will turn off.
(A)
WITCH
(B)
1
2
3
M (E)
ETER
W L (F)
ARNING IGHT