Mangla KM 600 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Manual KM 600 / KM 800

Instruction Manual

Table of Contents

Need help?

Do you have a question about the KM 600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mangla KM 600

Page 1 Manual KM 600 / KM 800 Instruction Manual...
Page 2: Table Of Contents
Contents Introduction Description Finger safety guard Controls Safety instructions Installation Before first use Accessories Operating How to mangle How to flatting Changing mangle cloth Maintenance Specifications Protection of the environment Warranty terms Dealer contact information Spare Parts List Notes...
Page 3: Introduction
This manual describes both the Cold Mangel 600 and Cold Mangel 800. What differentiates the machines is the width of the rolls. The images on the fol- lowing pages is showing KM 600. For more information on ironers and accessories, contact your dealer or visit www.mangla.se...
Page 4: Description
Description Construction. 1. Tabletop 2. Handle 3. Finger safety guard 4. Cloth 5. Roll 6. Lifting handle...
Page 5: Finger Safety Guard
Finger safety guard The finger guard function. 1. Finger guard stop position 2. Finger guard start position Controls Close/open the rollers.
Page 6: Safety Instructions
Safety instructions Read the instructions carefully before use. Familiarize yourself with the mangle • Read all instructions and all warning labels on the device prior to use, to under- stand its use, limitations and potential risks. Drugs, alcohol and medicine •...
Page 7 Safety instructions Avoid electrocution • Check that the mains voltage corresponds to 230 V 50 Hz and that the circuit is correct fused and grounded. • Mangle may only be connected to the earth circuit. • Keep bystanders at a safe distance. •...
Page 8 Safety instructions The person should use mangle must have: • Adequate knowledge of and familiarity with the use, adjustment and operation of the mangle. The following general conditions must also be met: • mangle should understatement stand on a horizontal surface and the area around- machine shall be horizontal, well cohesive and free of loose objects.
Page 9 Safety instructions Symbols Crushing Hazard LÄS BRUKSANVISNINGEN INNAN ANVÄNDNING! Transport securing If any of the warning stickers on the machine will be damaged or lost must be replaced. Contact the vendor for order.
Page 10: Installation
Installation The mangle should be placed on a flat, horizontal surface. Ensure that the device is not in danger of slipping on the surface. When mangle mounted on the mounting accessories are described in the manual sup- plied with the accessory. The electrical connection plugged into grounded outlet (230 V / 50 Hz min 10 A).
Page 11: Accessories
Accessories Table mount KM 600 / KM 800. Floor stand KM 600 / KM 800. Wall mount KM 600 / KM 800. Consult your dealer for prices or visit www.mangla.se...
Page 12: Operating
Mangling Exposing the rollers by lifting the operating rod upward. Pull mangle cloth about 1/2 meters. Dampen the fabric lightly with a spray bottle (not included). Place the fabric cloth finishing fabric, the fabric needs bay to fit. Lower operating rod operation. Set the finger guard in the operating mode and control up texting on the way into the mangle to avoid wrinkling.
Page 13 Pull out mangle cloth. Place the fabric / clothing. Lower the control handle in operation mode. Start the mangle.
Page 14 Flatting • Exposing the rollers by lifting the operating rod upward. • Let mangle cloth being rolled up on the roller. • Dampen the fabric lightly with a spray bottle (not included). • Place the fabric table just in front of rollers, if necessary, fold the fabric to fit. •...
Page 15 Place the fabric / clothing. Start the mangle and feed the fabric. The control fabric / clothing to avoid wrinkles. The textile / clothing fed out the back.
Page 16 Replacing mangle cloth Make sure to mangle is disconnected from the mains. Exposing the rollers by lifting the operating rod upward. Unroll mangle the screen so that the groove becomes accessible. Remove the rubber top of the groove in the roller. Pull mangle cloth out of the groove.
Page 17 Replacing mangle cloth Pull out the old cloth. Insert the new cloth.
Page 18: Maintenance
Maintenance Never let the goods remain on the rolls for longer times when the mangle not in use. Then mangling is done check if mangle cloth is damp, if so let it hang unwound and dry before it is wound onto the drum to avoid damage to mangle cloth. All bearings in the mangle is self-lubricating and require no maintenance during mangle design life.
Page 19 Technical Data KM 600 / KM 800 Width x Depth x Height 810x340x280 / 1010x340x280 Mangle rolls length 600 mm / 800 mm Mangle rolls diameter 109 mm Roll Pressure ~ 400 Kg Mangelduk Undyed linen fabric L = 1,3 m...
Page 20 - Equipment and optional extras - External damage to the sheet metal, decals and paint - Wear and consumption details In Sweden refers to Konsumentköp EHL 2005. Before requesting service, please read the Trouble- shooting (page 18). Visit www.mangla.se for more information.
Page 21 Manufacturer Dealer’s contact details Right to changes reserved. If you have any problems, please contact our Service Department at www.mangla.se...
Page 22: Spare Parts List
Spare Parts To ensure the best performance and safety, keep your mangle in good condition. The following items are ordered through www.mangla.se • Mangle Cloth 600 • Mangle Cloth 800 • Sticker kit 600 • Sticker kit 800...
Page 23: Notes
Notes...
Page 24 Tips, accessories and documentation.

This manual is also suitable for:

Km 800