Using The Remote Control - Whalen SF122-23A Use And Care Manual

Operation (continued)
6
Using the main power button
Press the power button (6) to turn the fireplace/heater unit
□
on and off. Press the power button (6) once to turn the
unit on. Press again to turn the unit off.

Using the Remote Control

1
Installing the battery
For replacement batteries, use lithium-based CR2025 batteries.
Take out the battery bracket.
□
1
PUSH
2
OPEN
Insert the battery with the button side into the battery bracket, making sure the battery is firmly seated.
□
LITHIUM BATTERY
CR2025
3V
Press the battery bracket into the remote control, making sure it snaps into position.
□
Turn the remote over and aim it towards the fireplace/heater unit.
□
Press the power button on the upper right, and see if the flames on the fireplace/heater turn on or off.
□
If nothing appears to happen, check to make sure the battery is installed correctly, and try again.
□
7
Using Demo mode
Press the switch at the back of the fireplace to set the heater
□
to Demo Mode. It will eliminate the ability for the heater to be
turned on when the rocker switch is set at "I" position. The
rocker switch is set at "O" position for shipping which is to
keep the heater turn on with pressing the heater button on
control panel.
6
7