Ec-Declaration Of Conformity - Husqvarna 323P4 Operator's Manual

Bar and chain combinations
The following combinations are CE approved.
Length, inch
10
12
10
12
D
_
D
PITCH =
2
Accessories
Saw attachment with shaft PA 110

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the pruning saws
Husqvarna 323P4 and 325P5 dating from 2002 serial numbers and onwards (the year is clearly stated on the rating plate, followed
by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
The following standards have been applied: EN292-2, CISPR 12:1997, EN ISO 11806.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out voluntary type approval for
Husqvarna AB. The certificates have the numbers: 404/01/841 – 323P4, 404/02/863 – 325P5.
The supplied pruning saw conforms to the example that underwent EC type examination.
Huskvarna January 3, 2002
Bo Andréasson, Development manager
TECHNICAL DATA
Bar
Max. no of teeth on tip
Pitch, inch
sprocket
3/8 7T
3/8 7T
3/8 7T
3/8 7T
Art No. Use with
537 18 33-13 325P5
Chain
Husqvarna S 36/Oregon 91 VG
Husqvarna S 36/Oregon 91 VG
Oregon 90SG
Oregon 90SG
L
– 29
English