Motorola FX9500 User Manual page 36

4 - 8 FX9500 RFID Reader User Guide
General Settings
General Settings specify the host and domain name of the reader. Also, the Command Port and Event Port are
shown and are read-only.
IPv4/IPv6 Settings
IPv4/IPv6 Settings configure the reader's IP address. If the reader is to automatically acquire its IP address,
subnet mask and default gateway from a DHCP server, select Enable DHCP. To manually specify this information,
deselect Enable DHCP and fill in the desired IP address, subnet mask and default gateway.
Other Settings
Other Settings offer the ability to configure the NTP servers the reader can contact to obtain the current time,
DNS servers the reader can contact for domain name resolution, and the Domain list to resolve names to IP
addresses.
Enter all the required information and press Submit.