Kick - Sub - Maschine mikro User Manual

▪ Bold: ↑10.2.6, Kick –
▪ Maple: ↑10.2.7, Kick –
▪ Push: ↑10.2.8, Kick –
For more information on engines, see
synth. For general information on the Kick and the other Drumsynths, see
synths – General
10.2.1 Kick – Sub
The Sub engine is the default engine of the Kick.
Based on the kick from a classic analog drum machine, the Sub kick is a clean, subby, sine-
based kick drum which can be very effectively abused as a sub bass, tom or even a bleepy lead
if tuned up and played chromatically on the keyboard.
The parameters described below are presented as they appear in the Control area (Arrange
view). The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix
view). See ↑9.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Decay
Bold.
Maple.
Push.
↑10.1.1, Engines: Many Different Drums per Drum-
Handling.
for more information on this.
Description
Selects the engine used in the Kick Plug-in. If you change this setting, please
refer to ↑10.2, The Kicks.
Adjusts the pitch of the drum played by the middle C, measured in MIDI note
numbers and cents. Available values range from 31.00 to 55.00. The default
value is 43.00. For more details see
Notes.
Adjusts the duration of the sound's tail, measured as a percentage. Available
values range from 0.0 to 100.0 % (default: 50.0 %).
↑10.1, Drum-
↑10.1.5, Pitch Range, Tuning, and MIDI
MASCHINE MIKRO - Manual - 413
Using the Drumsynths
The Kicks