Filter
Select
Menu > Operations > Filter
•
Pre-Filter
•
Post-Filter
•
Access-Filter
Pre-Filter
Select
Menu > Operations > Filter > Pre-Filter
PreFilter Window
Figure 4-11
This window includes the following fields:
•
- Selecting an antenna ID updates the configuration values in the other fields.
Antenna ID
•
- Memory bank on which the filter is applied.
Memory Bank
•
- The first (msb) bit location of the specified memory bank against which to compare the tag mask.
Offset
•
- The pattern against which to compare the specified memory bank.
Tag Pattern
•
- Select the required filter action. For more information, refer to the Gen2 specification available
Filter Action
at http://www.epcglobalinc.org/standards/.
to view/configure the following filters:
to view/configure pre-filters.
RFID Sample Application 4 - 11