Seat; Helmet Holder - Yamaha YBR250 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Seat

To remove the seat
1. Insert the key into the seat lock,
and then turn it clockwise.
3
1. Seat lock
2. Unlock.
2. Pull the seat off.
To install the seat
1. Insert the projections on the front
of the seat into the seat holders as
shown.
EAU13800
1. Projection
2. Seat holder
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
TIP
Make sure that the seat is properly se-
cured before riding.
3-10

Helmet holder

1. Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 3-10.)
2. Attach the helmet to the helmet
holder, and then securely close the
seat. WARNING! Never ride with
a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
EAU14301
[EWA10161]