Yamaha VERSITY 300 VP300 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Scooter
  5. VERSITY 300 VP300
  6. Owner's manual

Yamaha VERSITY 300 VP300 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
VP300
1S6-F8199-E1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VERSITY 300 VP300 and is the answer not in the manual?

Questions and answers

Related Manuals for Yamaha VERSITY 300 VP300

Summary of Contents for Yamaha VERSITY 300 VP300

  • Page 1 OWNER’S MANUAL VP300 1S6-F8199-E1...
  • Page 3 EAU10110 Welcome to the Yamaha world of motorcycling! As the owner of the VP300, you are benefiting from Yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
  • Page 4 This manual should be considered a permanent part of this scooter and should remain with it even if the scooter is sub- sequently sold. Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your scooter and this manual.
  • Page 5 IMPORTANT MANUAL INFORMATION EAUM1010 VP300 OWNER’S MANUAL ©2004 by MBK INDUSTRIE 1st edition, August 2004 All rights reserved Any reprinting or unauthorized use without the written permission of MBK INDUSTRIE is expressly prohibited. Printed in France.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS SAFETY INFORMATION ....1-1 Luggage hook ......3-14 Air filter and V-belt case air filter Further safe-riding points ....1-4 Sidestand ........3-15 elements ........6-14 Ignition circuit cut-off system ..3-15 Adjusting the carburetor ....6-16 DESCRIPTION ........2-1 Auxiliary DC jack ......
  • Page 7 TABLE OF CONTENTS Replacing the tail/brake light bulb or a rear turn signal light bulb ...6-29 Replacing the license plate light bulb ...........6-30 Troubleshooting ......6-30 Troubleshooting charts ....6-31 SCOOTER CARE AND STORAGE ...7-1 Care ..........7-1 Storage ...........7-3 SPECIFICATIONS ......8-1 CONSUMER INFORMATION.....9-1 Identification numbers ....9-1...

  • Page 8: Safety Information

    SAFETY INFORMATION EAU10260 Safe riding Many accidents involve inexperi- Always make pre-operation enced operators. In fact, many op- SCOOTERS ARE SINGLE TRACK checks. Careful checks may help erators who have been involved in VEHICLES. THEIR SAFE USE AND prevent an accident. accidents do not even have a cur- OPERATION DEPENDENT...
  • Page 9 Modifications made to this scooter not other motorists can see you. accidents are the result of head inju- approved by Yamaha, or the removal of The posture of the operator and ries. The use of a safety helmet is the...
  • Page 10 Gasoline and exhaust gas been specifically designed for use on lightweight as possible and GASOLINE IS HIGHLY FLAMMA- this scooter. Since Yamaha cannot test should be kept to a minimum. BLE: all other accessories that may be avail- • Bulky or large accessories may •...

  • Page 11: Further Safe-Riding Points

    SAFETY INFORMATION Never start the engine or let it run eyes, see your doctor immediately. EAU10371 Further safe-riding points for any length of time in a closed If any gasoline spills on your skin Be sure to signal clearly when area.
  • Page 12 SAFETY INFORMATION Always wear a helmet, gloves, trousers (tapered around the cuff and ankle so they do not flap), and a bright colored jacket. Do not carry too much luggage on the scooter. An overloaded scoot- er is unstable.

  • Page 13: Description

    DESCRIPTION EAU10410 Left view 1. Rear storage compartment (page 3-13) 2. Shock absorber assembly spring preload adjusting ring (page 3-14) 3. Air filter element (page 6-14) 4. V-belt case air filter element (page 6-14) 5. Sidestand (page 3-15/6-23) 6. Coolant level check window (page 6-13)

  • Page 14: Right View

    DESCRIPTION EAU10420 Right view 2 3 4 1. Grab bar (page 5-2) 9. Rear brake pads (page 6-20) 2. Fuel tank cap (page 3-9) 3. Battery (page 6-25) 4. Coolant reservoir cap (page 6-13) 5. Front brake pads (page 6-20) 6.

  • Page 15: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments PUSH 1. Rear brake lever (page 3-9) 9. Front brake lever (page 3-8) 2. Left handlebar switches (page 3-7) 10.Front storage compartment A (page 3-12) 3. Front storage compartment B (page 3-12) 11.Fuse box (page 6-26) 4.

  • Page 16: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU10460 EAU10660 loss of control or an accident. Make Main switch/steering lock OFF “ ” sure that the vehicle is stopped be- All electrical systems are off. The key fore turning the key to “ ” or “ ”. can be removed.

  • Page 17: Indicator Lights

    INSTRUMENT AND CONTROL FUNCTIONS EAU10980 EAUM1050 EAU11590 Indicator lights Low beam indicator light “ ” Speedometer This indicator light comes on when the low beam of the headlight is switched ZAUM0578 1. Low beam indicator light “ ” ZAUM0402 2. Left turn signal indicator light “ ”...

  • Page 18: Fuel Gauge

    (0.50 US gal) (0.42 Imp.gal), the fuel If the needle drops to the “9V” (low) level warning light will come on and the mark, have a Yamaha dealer check the multi-function display will automatically battery. change to the “Trip/fuel” mode. (See page 3-4.) If this occurs, refuel as soon...

  • Page 19: Multi-Function Display

    INSTRUMENT AND CONTROL FUNCTIONS EAUM2050 an ambient temperature display "Mode" Multi-function display an oil change indicator (which comes on when the engine oil should be changed) "Mode" "Mode" NOTE: For the UK, the distance traveled "Mode" is displayed in miles and the tem- perature reading is displayed in °F.
  • Page 20 INSTRUMENT AND CONTROL FUNCTIONS "Set" "Set" "Set" ZAUM0393 To reset a tripmeter, select it by push- ZAUM0394 ZAUM0392 1. Distance 3. Push the “MODE” button, and the ing the “MODE” button, and then push 2. Time minute digits will start flashing. the “SET”...
  • Page 21 INSTRUMENT AND CONTROL FUNCTIONS Ambient temperature display Oil change indicator “OIL” NOTE: The oil change indicator will come on at the initial 1000 km (600 mi) and every 3000 km (4800 mi) thereafter. If the engine oil is changed before the oil change indicator comes on (i.e.

  • Page 22: Anti-Theft Alarm (Optional)

    ” 1. Pass switch “ ” This model can be equipped with an 2. Dimmer switch “ ” optional anti-theft alarm by a Yamaha EAU12350 3. Turn signal switch “ ” Pass switch “ ” dealer. Contact a Yamaha dealer for 4.

  • Page 23: Front Brake Lever

    INSTRUMENT AND CONTROL FUNCTIONS position. To cancel the turn signal EAUM1990 EAU12900 Hazard switch “ ”, “ ” Front brake lever lights, push the switch in after it has re- With the key in the “ ” position, set turned to the center position. this switch to “...

  • Page 24: Rear Brake Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU12950 EAU13140 Rear brake lever Fuel tank cap NOTE: The fuel tank cap cannot be installed unless the key is in the lock. In addition, To remove the fuel tank cap the key cannot be removed if the cap is 1.

  • Page 25: Fuel

    Your Yamaha engine has been de- signed to use regular unleaded gaso- line with a research octane number of 91 or higher. If knocking (or pinging) oc-...

  • Page 26: Catalytic Converter

    INSTRUMENT AND CONTROL FUNCTIONS EAU13440 EAU13931 2. Remove the key from the main Catalytic converter Seat switch if the scooter will be left un- This vehicle is equipped with a catalytic attended. converter in the muffler. To open the seat NOTE: 1.

  • Page 27: Storage Compartment

    INSTRUMENT AND CONTROL FUNCTIONS EAUM1181 To lock the storage compartment EAUM1490 Storage compartment Storage compartment Insert the key in the lock and turn it 1/4 turn counterclockwise, and then re- LOCK move the key. OPEN EWA10960 UNLOCK WARNING LOCK Do not exceed the load limit of 1 OPEN kg (2.2 lb) for the storage com- UNLOCK...

  • Page 28: Storage Compartment

    Yamaha U-LOCK. (See page 3-11.) To avoid humidity from spread- When placing a U-LOCK in the storage ing through the storage com-...

  • Page 29: Adjusting The Shock Absorber Assemblies

    INSTRUMENT AND CONTROL FUNCTIONS EAU14880 EWA10210 EAUT1070 Adjusting the shock absorber Luggage hook WARNING assemblies Always adjust both shock absorber assemblies equally, otherwise poor handling and loss of stability may result. Adjust the spring preload as follows. To increase the spring preload and thereby harden the suspension, turn the adjusting ring on each shock ab- ZAUM0415...

  • Page 30: Sidestand

    Therefore, check It prevents starting when either this system regularly as described brake is applied, but the sidestand below and have a Yamaha dealer re- ZAUM0416 is still down. 1. Sidestand switch pair it if it does not function proper-...
  • Page 31 Does the engine start? The sidestand switch may be defective. The scooter should not be ridden until checked by a Yamaha dealer. With the engine still off: 6. Move the sidestand up. 7. Keep the front or rear brake applied.

  • Page 32: Auxiliary Dc Jack

    INSTRUMENT AND CONTROL FUNCTIONS EAUM2000 To use the auxiliary DC jack Auxiliary DC jack 1. Turn the key to “ ”. 2. Remove the dust cap from the re- ceptacle. 3. Insert the accessory plug into the receptacle. 4. Turn the key to “ ”, and then start the engine.

  • Page 33: Pre-Operation Checks

    PRE-OPERATION CHECKS EAU15591 The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences.

  • Page 34: Pre-Operation Check List

    • If necessary, add recommended brake fluid to specified level. • Check hydraulic system for leakage. • Make sure that operation is smooth. • Check cable free play. Throttle grip 6-16, 6-22 • If necessary, have Yamaha dealer adjust cable free play and lubricate cable and grip housing.
  • Page 35 Chassis fasteners — • Tighten if necessary. Instruments, lights, signals • Check operation. — and switches • Correct if necessary. • Check operation of ignition circuit cut-off system. Sidestand switch 3-15 • If system is defective, have Yamaha dealer check vehicle.

  • Page 36: Operation And Important Riding Points

    Consult a Yamaha dealer re- In order for the ignition circuit cut-off garding any control or function system to enable starting, the side-...

  • Page 37: Starting Off

    OPERATION AND IMPORTANT RIDING POINTS EAU16760 EAU16780 EAU16791 Starting off Acceleration and deceleration Braking 1. Close the throttle completely. NOTE: 2. Apply both front and rear brakes Before starting off, allow the engine to simultaneously while gradually in- warm up. creasing the pressure.

  • Page 38: Tips For Reducing Fuel Consumption

    OPERATION AND IMPORTANT RIDING POINTS Keep in mind that braking on a EAU16820 EAU16841 Tips for reducing fuel Engine break-in wet road is much more difficult. consumption There is never a more important period Ride slowly down a hill, as brak- in the life of your engine than the period Fuel consumption depends largely on ing downhill can be very diffi-...

  • Page 39: Parking

    If any engine trouble should occur touch them. during the engine break-in period, Do not park on a slope or on soft immediately have a Yamaha dealer ground, otherwise the vehicle check the vehicle. may overturn. ECA10380...

  • Page 40: Periodic Maintenance And Minor Repair

    If you do not have the tools or experi- CAL LOCATION, AND INDIVIDUAL ence required for a particular job, have USE, THE MAINTENANCE INTER- a Yamaha dealer perform it for you. VALS MAY NEED TO BE SHORT- ENED. EWA10350 WARNING...

  • Page 41: Periodic Maintenance And Lubrication Chart

    The annual checks must be performed every year, except if a kilometer-based maintenance is performed in- stead. From 50000 km, repeat the maintenance intervals starting from 10000 km. Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. ODOMETER READING (× 1000 km)
  • Page 42 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING (× 1000 km) ANNUAL ITEM CHECK OR MAINTENANCE JOB CHECK √ √ √ √ 9 * Wheels • Check runout and for damage. • Check tread depth and for damage. • Replace if necessary. √...
  • Page 43 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING (× 1000 km) ANNUAL ITEM CHECK OR MAINTENANCE JOB CHECK 23 * V-belt • Replace. Every 20000 km Front and rear brake √ √ √ √ √ √ 24 * • Check operation. switches Moving parts and ca- √...

  • Page 44: Removing And Installing Cowlings And Panels

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU18711 Removing and installing cowlings and panels The cowlings and panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a cowling or panel needs to be re- moved and installed.
  • Page 45 PERIODIC MAINTENANCE AND MINOR REPAIR To install the cowling 1. Connect the headlight coupler and the turn signal coupler. 2. Place the cowling in the original position, and then install the screws. 3. Install the panel. 4. Place the floorboard mats in their original position.
  • Page 46 PERIODIC MAINTENANCE AND MINOR REPAIR 2. Remove the screws on each side To install the cowling of scooter, and then take the cowl- 1. Place the cowling in the original ing off. position, and then install the screws. 2. Place the floorboard mats in their original position.
  • Page 47 PERIODIC MAINTENANCE AND MINOR REPAIR EAU19501 Panel D To remove the panel Pull the panel off as shown. ZAUM0434 ZAUM0435 1. Screw 1. Floorboard mat 2. Panel B 2. Remove the panel as shown. To install the panel Place the panel in the original position, ZAUM0437 1.

  • Page 48: Checking The Spark Plug

    NOTE: If the spark plug shows a distinctly dif- ferent color, the engine could be defec- tive. Do not attempt to diagnose such ZAUM0438 problems yourself. Instead, have a 1. Spark plug cap Yamaha dealer check the vehicle.

  • Page 49: Engine Oil

    PERIODIC MAINTENANCE AND MINOR REPAIR 2. Check the spark plug for electrode 2. Clean the surface of the spark plug EAUM1550 Engine oil erosion and excessive carbon or gasket and its mating surface, and The engine oil level should be checked other deposits, and replace it if then wipe off any grime from the before each ride.
  • Page 50 PERIODIC MAINTENANCE AND MINOR REPAIR 2. Place an oil pan under the engine 5. Install the washer and the engine NOTE: to collect the used oil. oil drain bolt, and then tighten the The engine oil should be between the 3.

  • Page 51: Final Transmission Oil

    If any leakage is found, have a it for oil leakage. If oil is leaking, im- Yamaha dealer check and repair the mediately turn the engine off and scooter. In addition, the final transmis- check for the cause.

  • Page 52: Coolant

    PERIODIC MAINTENANCE AND MINOR REPAIR 6. Add the specified amount of the EAU20070 Coolant NOTE: recommended final transmission The coolant should be between the The coolant level should be checked oil, and then install and tighten the minimum and maximum level marks. before each ride.

  • Page 53: Air Filter And V-Belt Case Air Filter Elements

    The air filter and V-belt case air filter el- If water has been added to the ements should be cleaned at the inter- coolant, have a Yamaha dealer vals specified periodic check the antifreeze content of maintenance and lubrication chart.
  • Page 54 PERIODIC MAINTENANCE AND MINOR REPAIR ZAUM0447 ZAUM0446 1. V-belt case air filter cover 1. Air filter case cover 2. Screw NOTE: 2. Screw 3. Sponge material The sponge material should be wet but 3. Blow the dirt out of the air filter ele- 4.

  • Page 55: Adjusting The Carburetor

    ZAUM0051 1. Throttle cable free play The throttle cable free play should mea- sure 1.5–3.0 mm (0.06–0.12 in) at the throttle grip. Periodically check the throttle cable free play and, if neces- sary, have a Yamaha dealer adjust it. 6-16...

  • Page 56: Valve Clearance

    Yamaha dealer at the intervals specified in the periodic Tire air pressure Tire air pressure (measured on cold maintenance and lubrication chart.
  • Page 57 Have a Yamaha dealer replace glass fragments in it, or if the sidewall is Do not carry along loosely excessively worn tires. Besides cracked, have a Yamaha dealer re- packed items, which can shift being illegal, operating the vehi- place the tire immediately.

  • Page 58: Cast Wheels

    EAU21960 EAUM2060 ver free play and, if necessary, have a Cast wheels Checking the front and rear Yamaha dealer check the brake sys- To maximize the performance, durabil- brake lever free play tem. ity, and safe operation of your vehicle,...

  • Page 59: Checking The Front And Rear Brake Pads

    EAU22580 Checking the front and rear Checking the brake fluid level peared, have a Yamaha dealer replace brake pads the brake pads as a set. Front brake The front and rear brake pads must be...

  • Page 60: Changing The Brake Fluid

    Changing the brake fluid is above the minimum level mark and ter the brake fluid reservoir when Have a Yamaha dealer change the replenish if necessary. A low brake fluid refilling. Water will significantly brake fluid at the intervals specified in...

  • Page 61: Checking And Lubricating The Cables

    If a cable is damaged periodic maintenance chart. or does not move smoothly, have a Yamaha dealer check or replace it. Recommended lubricant: ZAUM0061 Engine oil The pivoting points of the front and rear...

  • Page 62: Checking And Lubricating The Centerstand And Sidestand

    If the centerstand or sidestand does fork must be checked as follows at the not move up and down smoothly, intervals specified in the periodic main- have a Yamaha dealer check or re- tenance and lubrication chart. pair it. To check the condition...

  • Page 63: Checking The Steering

    If any damage is found or the front 1. Place a stand under the engine to fork does not operate smoothly, raise the front wheel off the ZAUM0457 have a Yamaha dealer check or re- ground. pair it. EWA10750 WARNING Securely support the vehicle so that there is no danger of it falling over.

  • Page 64: Checking The Wheel Bearings

    Batteries produce explosive hy- drogen gas. Therefore, keep To charge the battery sparks, flames, cigarettes, etc., Have a Yamaha dealer charge the bat- away from the battery and pro- tery as soon as possible if it seems to vide sufficient ventilation when have discharged.

  • Page 65: Replacing The Fuses

    The main fuse box is located behind CHILDREN. sealed-type (MF) battery charg- panel C. (See page 6-8.) er, have a Yamaha dealer charge your battery. To store the battery 1. If the model will not be used for more than one month, remove the battery, fully charge it, and then place it in a cool, dry place.

  • Page 66: Replacing The Headlight Bulb

    2. Remove the blown fuse, and then 4. If the fuse immediately blows install a new fuse of the specified again, have a Yamaha dealer amperage. check the electrical system. 6-27...

  • Page 67: Replacing A Front Turn Signal Light Bulb

    ECA10670 headlight bulb to keep it free from CAUTION: oil, otherwise the transparency of It is advisable to have a Yamaha the glass, the luminosity of the bulb, dealer perform this job. and the bulb life will be adversely af- fected.

  • Page 68: Replacing The Tail/Brake Light Bulb Or A Rear Turn Signal Light Bulb

    PERIODIC MAINTENANCE AND MINOR REPAIR 5. Insert a new bulb into the socket, EAUT1270 6. Install the socket (together with the Replacing the tail/brake light push it in, and then turn it clock- bulb) by turning it clockwise. bulb or a rear turn signal light wise until it stops.

  • Page 69: Replacing The License Plate Light Bulb

    The following troubleshooting charts represent quick and easy procedures for checking these vital systems your- self. However, should your scooter re- quire any repair, take it to a Yamaha ZAUM0467 dealer, whose skilled technicians have 1. Bulb socket the necessary tools, experience, and 2.

  • Page 70: Troubleshooting Charts

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.
  • Page 71 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. NOTE: If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 72: Scooter Care And Storage

    SCOOTER CARE AND STORAGE EAU26090 ucts onto seals, gaskets and wheel thinner, fuel (gasoline), rust re- Care axles. Always rinse the dirt and de- movers or inhibitors, brake flu- While the open design of a scooter re- greaser off with water. id, antifreeze or electrolyte.
  • Page 73 SCOOTER CARE AND STORAGE After normal use ECA10790 5. Touch up minor paint damage CAUTION: Remove dirt with warm water, a mild caused by stones, etc. detergent, and a soft, clean sponge, 6. Wax all painted surfaces. Do not use warm water since it in- and then rinse thoroughly with clean 7.

  • Page 74: Storage

    Always store your scooter in a cool, dry NOTE: fuel tank. place and, if necessary, protect it Consult a Yamaha dealer for advice on 3. Fill up the fuel tank and add fuel against dust with a porous cover. what products to use.
  • Page 75 SCOOTER CARE AND STORAGE EWA10950 °C (90 °F)]. For more information WARNING on storing the battery, see page To prevent damage or injury from 6-25. sparking, make sure to ground the NOTE: spark plug electrodes while turning Make any necessary repairs before the engine over.

  • Page 76: Specifications

    SPECIFICATIONS Dimensions: Engine oil: Air filter: Overall length: Type: Air filter element: 2170 mm (85.4 in) SAE10W30 or SAE10W40 or SAE15W40 Wet element Overall width: or SAE20W40 or SAE20W50 Fuel: 765 mm (30.1 in) Recommended fuel: Overall height: Regular unleaded gasoline only -20 -10 10 20 30 40 50 ˚C 1465 mm (57.7 in)
  • Page 77 SPECIFICATIONS Operation: Rear: Operation: Centrifugal automatic type 190 kPa (28 psi) (1.90 kgf/cm²) Left hand operation Chassis: Loading condition: Recommended fluid: 90–160 kg (198–353 lb) DOT 4 Frame type: Front: Front suspension: Steel tube underbone 180 kPa (26 psi) (1.80 kgf/cm²) Caster angle: Type: Rear:...
  • Page 78 SPECIFICATIONS Tail/brake light: 12 V, 5.0 W/21.0 W × 2 Front turn signal light: 12 V, 21.0 W × 2 Rear turn signal light: 12 V, 10.0 W × 2 Auxiliary light: 12 V, 5.0 W × 2 Licence plate light: 12 V, 5.0 W ×...

  • Page 79: Consumer Information

    Record the key identification number, vehicle identification number and mod- el label information in the spaces pro- vided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehi- cle is stolen. KEY IDENTIFICATION NUMBER:...
  • Page 80 1. Model label The model label is affixed to the bottom of the seat. (See page 3-11.) Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer.
  • Page 81 INDEX Periodic maintenance and lubrication chart............6-2 Acceleration and deceleration ....5-2 Final transmission oil......6-12 Pre-operation check list ......4-2 Air filter and V-belt case air filter Front and rear brake lever free play, elements, cleaning ......6-14 checking..........6-19 Anti-theft alarm (optional) ....... 3-7 Front and rear brake pads, checking ..6-20 Safe-riding points ........
  • Page 82 INDEX Valve clearance ........6-17 Vehicle identification number ....9-1 Wheel bearings, checking..... 6-25 Wheels ..........6-19...
  • Page 84 YAMAHA MOTOR CO., LTD. PRINTED IN FRANCE 2004.09...

Table of Contents

Save PDF