Yamaha FJR1300AS Owner's Manual page 60

INSTRUMENT AND CONTROL FUNCTIONS
TIP
If the preload setting was not complet-
ed correctly:
 The damping force setting and
setting level will flash 4 times and
3
cannot be adjusted if you try to
adjust them while the vehicle is
stopped.
 The preload setting pictogram will
flash and the damping force can-
not be adjusted if you try to adjust
it while the vehicle is moving.
Be sure that the preload has been set
correctly before adjusting the damping
force.
To adjust the damping force and
damping force setting level
1. Turn the key to "ON".
2. Push the menu switch "MENU" to
switch the function display to the
damping force adjusting function.
GEAR
N
STD
0
1. Function display
2. Damping force adjusting function
3. Use the select switch to select
"HARD", "STD" or "SOFT".
GEAR
N
HARD
0
1. Damping force setting
4. Push the menu switch "MENU".
5. Use the select switch to select the
desired level for the damping
force setting.
3-45
1
GEAR
N
2
HARD
1. Damping force setting level
TIP
The damping force setting can be set to
7 levels (+3, +2, +1, 0, –1, –2 and –3).
"+3" is the hardest level and "–3" is the
softest level.
6. Push the menu switch "MENU".
1
If the vehicle moves while you are ad-
justing the damping force, the informa-
tion display will change to the display
mode.
+3
1