Table of Contents
Advertisement
■ Lever friction adjuster
The remote control can be adjusted to suit
operator preference. Friction brakes adjust
the effort to move the control levers. Shift po-
sition detents adjust the click felt when en-
gaging the shift positions. Turn the adjusters
clockwise to increase the friction or detent
pressure. Turn counterclockwise to reduce
the friction or detent pressure.
WARNING
• If the friction brakes or shift position de-
tents are too loose, the remote control
levers may move too quickly, causing
accidents.
• Do not over-tighten the friction brakes
and shift position detents. If the remote
control levers movement is too heavy, it
may hinder the handling of the boat,
causing accidents.
1
1. Friction brakes
2. Shift position detents
Function and operation of components
1
2
■ Free throttle switch
When activated, the free throttle switch al-
lows opening the throttles of all engines with-
out engaging forward or reverse gear.
With the remote control levers in the N posi-
tion, press the free throttle switch, and then
move the remote control levers forward to
open and close the throttle. Moving the re-
mote control levers rearward will also open
and close the throttle. The active indicator
will be illuminated during operation.
F
N
2
3
1
1. Fully open
2. Fully closed
3. Free accelerator
4. Active indicator
5. Free throttle switch
The free throttle switch cannot be operated
unless the remote control levers are in the N
position. To leave free throttle mode, place
the remote control levers in the N position
and press the free throttle switch. The active
indicator will go out.
■ Single lever switch
The single lever switch allows shift and throt-
tle operation of all engines using the PORT
lever. When activated the STBD lever will be
inoperable.
4
5
16
Hide quick links:
Advertisement
Table of Contents
