IMPORTANT SAFETY INFORMATION IMPORTANT Refer all servicing to qualified service personnel. CAUTION! Servicing is required when the apparatus has been This equipment generates, uses and can radiate radio RISK OF ELECTRIC SHOCK damaged in any way, such as the power-supply cord frequency energy and, if not installed and used in DO NOT OPEN or plug is damaged, liquid has been spilled or objects...
PRELIMINARIES INTRODUCTION INDEX Important safety information ........1 UNPACKING The TKSB215 Soundbar is a versatile speaker unit with Bluetooth connectivity and two analogue audio inputs Carefully unpack the unit. If it is damaged, please Index .................2 for audio-visual sources. return it to your nearest Tesco store for replacement.
WALL MOUNTING Keyhole slot Keyhole slot AUX IN LINE IN DC IN Optional wall-mounting: Supplied wall-fixing kit: Important notes for wall-mounting: The Soundbar has back panel keyhole slots for optional A wall-fixing kit is supplied and includes screws and • Tesco accepts no liability for damages caused by wall-mounting.
CONNECTING AN AUDIO SOURCE The LINE IN and AUX IN analogue inputs are for stereo CONNECTING TO A STEREO LINE OUTPUT Red plug analogue sources only. The LINE IN input has phono socket connection so is suitable for the sound output from a TV, DVD player, satellite receiver etc.
Page 9
CONNECTING AN AUDIO SOURCE Connecting to a SCART connector on your TV: CONNECTING TO A SCART CONNECTOR If your TV only has SCART connections, you will need a SCART adaptor (not supplied). Set the switch on the • Connect the red and white plugs of a stereo phono adapter to ‘OUT’...
CONNECTING A COMPUTER OR PORTABLE AUDIO PLAYER To connect a computer or portable audio player: CONNECTING TO A MINIJACK CONNECTOR You will need a jack to jack connecting cable (not supplied) terminated with a 3.5mm plug at each end. • Connect the cable to the AUX IN input jack on the terminal panel of the Soundbar.
REMOTE CONTROL REMOTE CONTROL BATTERIES FITTING/REPLACING BATTERIES Slide the lid off the battery compartment in the direction ON/OFF button shown. AUX In source select button Fit two AAA batteries MUTE ON-OFF Bluetooth source select button observing polarity as shown Increase treble button below.
CONNECTING POWER OPERATION Before connecting the Soundbar to mains power, check POWER CONTROL SELECTING A SOURCE that the mains supply voltage in your area is within the To switch the unit on: Selecting a source from the control panel: range specified on the rating label on the AC adapter. •...
Page 13
• Press and hold the control. The source will now scan for other Bluetooth devices and should find the unit, identified as ‘TKSB215’ . After two seconds the settings will be returned to the factory setting. • Choose to pair with this.
CARE AND MAINTENANCE TROUBLESHOOTING SPECIFICATIONS AFTER USING THE SOUNDBAR No sound Supply voltage, current ..19V , 1A • Set it to Standby. • Check that the Soundbar is not set to Standby. AC adapter supply voltage.. 100-240 V~, 50/60 Hz, 1A •...
Page 16
Delamare Road, Cheshunt, Herts, EN8 9SL Technika Helplines: Landlines 0800 323 4060 (Freephone from a BT landline). Mobiles 0330 123 4060 (Calls cost no more than calls to geographic numbers eg. 01 or 02 and are included in inclusive minutes and discount schemes). TKSB215 V0.1...
Need help?
Do you have a question about the TKSB215 and is the answer not in the manual?
Questions and answers