Manual Override - Danfoss RET2000B-RF + RX1-S User Manual

Manual Override

During normal Thermostat operation the CH button on the
GB GB
receiver will light when the device is calling for heat (or cooling
depending on mode). Should communication between the
DE
thermostat and receiver fail, manual override is possible by
pressing the CH button once; the heating/cooling system will
DK
remain on during manual override as indicated by the lit CH
button. Press CH button again to cancel manual override. When
communication is re-established the thermostat and receiver
ES
will return to automatic control.
FR
Warning – Leaving the system in manual override will result in
the boiler heating continually and will result in higher energy
NL
usage.
RU
TR
10 RET2000