intrepid i300 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

i300 TREADMILL

Owners

Manuall

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL

Table of Contents

Need help?

Do you have a question about the i300 and is the answer not in the manual?

Questions and answers

Lawrence W Raines

January 23, 2025

What type and brand of lubricant do I use?

1 comments:

Mr. Anderson

February 10, 2025

Silicone lubricant should be used for the Intrepid i300 Treadmill.

This answer is automatically generated

Raymond Sanchez

February 9, 2025

Need a key

Summary of Contents for intrepid i300

Page 1 TREADMILL Owners Manuall PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL...
Page 2: Table Of Contents
TABLE OF CONTENTS PRODUCT REGISTRATION IMPORTANT SAFETY INSTRUCTIONS IMPORTANT ELECTRICAL INSTRUCTIONS IMPORTANT OPERATION INSTRUCTIONS i300 ASSEMBLY INSTRUCTIONS OPERATION OF YOUR CONSOLE PROGRAMMABLE FEATURES GENERAL MAINTENANCE TROUBLE SHOOTING MANUFACTURER’S LIMITED WARRANTY ATTENTION THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THIS APPLICATION.
Page 3: Product Registration
Congratulations On Your New Treadmill and Welcome to the INTREPID Family! Thank you for your purchase of this quality treadmill from INTREPID. Your new treadmill has been man- ufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available.
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING To reduce the risk of burns, fire, electric shock, or injury to persons: •...
Page 5: Important Electrical Information
IMPORTANT ELECTRICAL INFORMATION WARNING NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including the elevation mecha- nism and transport wheels.
Page 6: Important Operation Instructions
• NEVER mount or dismount the treadmill while the belt is moving. INTREPID treadmills start with at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.
Page 7 ASSEMBLY PACK CHECKLIST HARDWARE STEP 3 #79 Ø8 x Ø18 x 1.5T #94 5/16" x Ø18 x 1/2" #95 Ø8 x Ø23 x 1.5T Flat Washer Button Head Socket Bolt Curved Washer (4 pcs) (6 pcs) (2 pcs) HARDWARE STEP 5 #94 5/16"...
Page 8: Assembly
ASSEMBLY STEP 1 HARDWARE No Hardware required for this step 1. Remove the UNIT from the box and put it on a flat and level floor. ASSEMBLY STEP 2 HARDWARE No Hardware required for this step NOTE: this step may work better with a second person assisting. 1.
Page 9 ASSEMBLY STEP 3 HARDWARE Bolt (94) Qty: 6 Flat Washer (79) Qty: 4 Curved Washer (95) Qty: 2 NOTE: this step may work better with a second person assisting. 1. Open HARDWARE FOR STEP 3. 2. Insert the UPRIGHTS (L, R)(3,4) into the FRAME BASE (2) with the 6 BUTTON HEAD SOCKET BOLTS (94), 4 FLAT WASH- ERS (79) and 2 CURVED WASHERS (95) by using the ALLEN WRENCH.
Page 10 ASSEMBLY STEP 4 HARDWARE No Hardware required for this step NOTE: this step may work better with a second person assisting. 1. Connect the UPPER COMPUTER CABLE (38) with the MIDDLE COMPUTER CABLE (39).
Page 11 ASSEMBLY STEP 5 HARDWARE HARDWARE Bolt (94) Qty: 4 Curved Washer (95) Qty: 4 NOTE: Be careful not to pinch the computer cables when attaching the console. 1. Open HARDWARE FOR STEP 5. 2. Install the CONSOLE SUPPORT (5) onto the UPRIGHTS (L,R) (4,3) with the 4 BUTTON HEAD SOCKET BOLTS (94) and 4 CURVED WASHERS (95) by using the ALLEN WRENCH.
Page 12: Folding Instructions
The treadmill is equipped with two transport wheels that are engaged when the treadmill is folded. After folding simply roll the treadmill away. OPERATION OF YOUR TREADMILL i300 CONSOLE GETTING STARTED Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood.
Page 13: Incline Feature
QUICK-START OPERATION 1. Attach the Safety key to enable the display (if not already on). 2. Press the Start key to begin belt movement. Adjust to the desired speed using the Speed p and q keys. You may also use the Quick Speed keys 3 through 9 to adjust the speed. 3.
Page 14: Programmable Features
Key: Speed PROGRAMMABLE FEATURES The i300 Treadmill provides 12 programs (P1,P2,P3……P12). Each program has its specific speed variations. To Select and Start a Preset Program 1. Make sure the machine is in the stop position, single press Stop to enter into resetting state. Press Program to choose desired program (P1,P2, …..P12), then press and release Start to begin the...
Page 15: General Maintenance
GENERAL MAINTENANCE Belt and Deck - Your treadmill uses a very high-efficient low-friction deck. Performance is maximized when the deck is kept as clean as possible. Use a soft, damp cloth or paper towel to wipe the area between the frame and 6 - 8” under the belt. This should be done once every other month to extend belt and deck life.
Page 16: Treadbelt Tracking Adjustment
Adjustments will become less of a maintenance concern as the belt is used. Proper belt tracking is an owner responsibility common with all treadmills. ATTENTION Damage to the running belt resulting from improper tracking / tension adjustments is not covered under the INTREPID warranty.
Page 17: Belt/Deck Lubrication
BELT/DECK LUBRICATION PROCEDURE First, you want to clean between the belt and deck to remove any debris that may be trapped. Use a clean, non-fraying rag, t-shirt, or light towel. Halfway between the end of the treadmill and motor cover, shove the garment under the belt until you can grasp it on both sides of the belt.
Page 18: Diagnosis
SERVICE CHECKLIST - DIAGNOSIS GUIDE Before contacting us for aid, please review the following information. It may save you both time and expense. This list includes common problems that may not be covered under the treadmill’s warranty. Problem Meaning Solution/Cause Console Console shows E1 1.
Page 19: Manufacturer's Limited Warranty
Effective June 1, 2015 - TREADMILL LIMITED WARRANTY INTREPID Inc. warrants all its home use treadmill parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. INTREPID’s responsibilities include providing new or remanufactured parts, at INTREPID’s option, and technical support to our independent dealers and servicing organizations.