Problem Solving Guide; The Door Will Not Open; Power Cut During A Wash Programme - Emergency Door Release - Miele PW 6241 Operating Instructions Manual

Table of Contents

Advertisement

The door will not open

^ Press against the door handle and at the
same time switch the machine off and then
on again. Then try to open the door again.
If you still cannot open the door:
The door handle safety mechanism has
disingaged itself. The door handle cannot be
opened or closed.
The safety mechanism is designed to
protect the handle and the lock from
damage, for instance, if too much force is
being used in an attempt to open the
door.
^ Press firmly against the door handle until
you clearly hear the safety mechanism
engage.
You will now be able to open and close the
door again (as long as there is no water in
the machine).
Power cut during a wash
programme - Emergency door
release
With a short power cut:
The programme remains in the last position,
and when power is restored the following
message appears in the display:
M.-Nr. 06 572 495

Problem solving guide

Power cut
y
Programme stop
Press the start button.
ü
i
^ Press the START button and the
programme selected will continue.
With an extended power cut:
^ Switch the machine off.
^ Switch off the mains supply at the on-site
mains switch.
^ Close all stopcocks for water, gas and
steam as applicable.
To remove the laundry the drain valve will
need to be opened manually and the drum
door unlocked manually.
^ Open the drain valve by partially opening
the venting screw (spanner size 17 mm) at
the rear of the machine. Do not unscrew it
completely. Drain off the suds. Take care
as some water will seep out of the screw
opening (approx. 100 mm). This should be
collected in a suitable container.
^ Tighten up the venting screw again and
check that there is no leak.
f
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Innovation m pw 6241Innovation m pw 6321Pw 6321

Table of Contents