Grip Warmer Adjusting Knob - Yamaha FJR1300AS Owner's Manual

Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
12 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting knob fully turned
in direction (a)
WARNING
This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
G Do not tamper with or attempt to
open the gas cylinder.
G
Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
INSTRUMENT AND CONTROL FUNCTIONS
G
Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
G Always have a Yamaha dealer
service the shock absorber.
EWA10220

Grip warmer adjusting knob

This vehicle is equipped with grip
warmers, which can only be used when
the engine is running.
Use the grip warmer adjusting knob, lo-
cated near the accessory box, to adjust
the grip warmer temperature.
1. "LO" position
2. "OFF" position
3. "
4. Grip warmer adjusting knob
5. "HI" position
The grip warmer adjusting knob can be
set between the "LO" and "HI" posi-
tions. To raise the temperature, turn the
knob in direction (a). To lower the tem-
perature, turn the knob in direction (b).
Align the "
"OFF" to turn the grip warmers off.
3-31
" mark
" mark on the knob with
EAU40501
3