Toro 70185 Setup Instructions
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. 70185
  6. Setup instructions
Toro 70185 Setup Instructions

Toro 70185 Setup Instructions

Rear-engine
Hide thumbs Also See for 70185:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operator's Manual
G132 and H132 Rear-Engine Riding Mower
Model No. 70185
Model No. 70186

Loose Parts

Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
© 2007—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Description
Wheels
Flat washers, M16 (3 mm thick)
Spacers, M16 (1 mm thick)
Cotter pins
Seat
Screws, M8 x 18 mm
Flat washers, M9
Lock washers
Socket pin
Engine cover
Screws, M6 x 25 mm
Frame
Fabric bag with clips
Handle
Locknuts, M8
Washers, M9
Z-brackets
Bolts, M6 x 35 mm
Spacers
Washers
Nuts, M6
Grass collector cover
Pins
Full bag lever
Bolts, M6 x 20 mm
Flat washers, M6.5
Nuts, M6
No parts required
No parts required
No parts required
No parts required
Register at www.Toro.com.
Form No. 3359-686 Rev A
Qty.
2
2
Install the front wheels.
4
2
1
4
Install the seat.
4
4
1
Attach the steering wheel.
1
Install the engine cover.
2
1
1
1
Assemble the grass collector.
2
4
2
2
2
2
Install the grass collector.
2
1
2
1
2
4
Activate the battery.
2
–
Check the oil level.
–
Fill the fuel tank.
–
Check the tire pressure.
–
Test the safety system.
Setup Instructions
Use
Original Instructions (EN)
Printed in Italy
All Rights Reserved

Advertisement

Table of Contents
loading

Related Manuals for Toro 70185

Summary of Contents for Toro 70185

  • Page 1: Loose Parts

    Form No. 3359-686 Rev A G132 and H132 Rear-Engine Riding Mower Model No. 70185 Model No. 70186 Setup Instructions Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Wheels Flat washers, M16 (3 mm thick) Install the front wheels.

  • Page 2: Installing The Front Wheels

    Procedure Description Qty. Operator’s Manuals (English and French) Engine operator’s manual Read the manual before operating or Keys servicing the mower. Spark plug wrench Oil drain tube Recycler® cover Installing the Front Wheels Installing the Seat Parts needed for this procedure: Parts needed for this procedure: Wheels Seat...

  • Page 3: Attaching The Steering Wheel

    Attaching the Steering Wheel Installing the Engine Cover Parts needed for this procedure: Parts needed for this procedure: Socket pin Engine cover Screws, M6 x 25 mm Procedure Procedure 1. Rotate the steering wheel upward until it is aligned with the steering column. 1.

  • Page 4: Installing The Grass Collector

    Assembling the Grass Installing the Grass Collector Collector Parts needed for this procedure: Parts needed for this procedure: Z-brackets Bolts, M6 x 35 mm Frame Spacers Fabric bag with clips Washers Handle Nuts, M6 Locknuts, M8 Grass collector cover Washers, M9 Pins Full bag lever Procedure...

  • Page 5: Activating The Battery

    Battery electrolyte contains sulfuric acid, a deadly poison that can cause severe burns. • Do not drink electrolyte and avoid contact with skin, eyes or clothing. Wear safety glasses to shield your eyes and rubber gloves to protect your hands. •...

  • Page 6: Filling The Fuel Tank

    Charging the battery produces gasses that can explode. Filling the Fuel Tank Never smoke near the battery and keep sparks and flames away from battery. No Parts Required 8. When the battery is fully charged, unplug the charger Procedure from the electrical outlet, then disconnect the charger leads from the battery posts (Figure 11).

  • Page 7: Reading The Manual

    Reading the Manual Parts needed for this procedure: Operator’s Manuals (English and French) Engine operator’s manual Keys Spark plug wrench Oil drain tube Recycler® cover Procedure • Read the Operator’s Manual. • Read the engine owner’s manual. • Use the ignition key to start the engine and the KeyChoice key to operate the mower in reverse (refer to the Operator’s Manual).

Table of Contents