Figure 5-6. State Time Positional Overview Chart Of Example Measurement - HP 1630A Operating And Programming Manual

Performance Analysis Measurements
Model 1630A/D/G
?rme F'oartion Overview Chart---- IMSERT to autoscale___________
II, ificari
Mcgrrf~j a6_ .t
Cur .or moves
Max
Min
filF ' . l
IiuuunuuIII',,I
I11ltiWIi LllJOlil
occurrences
o occurrences 116
time o t o ; : 960. 0 rris
Figure 5-6. State Time Positional Overview Chart of Example Measurement
Magnification:
the magnification of the chart display from 1X to 40X. The bright baron the dotted
line at the bottom shows position of the display window within the total
measurement interval .
Magnify About:
forces the display to the area around either the "x" or "o" cursor .
Cursor Moves:
selects either the "x" or "o" cursor, or both cursors, to move when the cursor left or
right keys are pressed .
Max and Min :
select the vertical display area . These can be set to the max and min of the displayed
data by pushing INSERT when the "INSERT to autoscale" message appears. A ""
will appear by the "Min" or "Max" label if data is being clipped, within the display
window, at the top or bottom of the display area .
"x-Cursor" and
"o-Cursor" :
display the number of occurrences contained within the bars positioned at the
corresponding cursors.
"Time x to o" :
total time spanned between the "x" and "o" cursors .