Digital Atomic Wall Clock with Indoor/Outdoor Temperature Model: K86302 | Instruction Manual INTRODUCTION: The Digital Atomic Wall Clock features radio-controlled time, date, indoor and outdoor temperature on an easy to read display. Receives signal from the Atomic Clock in Colorado, for accurate time.
SPECIFICATIONS ACCURACY WARRANTY FCC DISCLAIMER K86302 11” W x 1.1” D x 8.54” H (280 x 28 x 217 mm) 2-AA, IEC, LR6 batteries (not included) TX14 2.5” L x 3.98” H x 1.42” W (64 x 101 x 36mm)
FEATURES: Wireless outdoor temperature (°F or °C) with trend arrow Monitors indoor temperature (°F or °C) with trend arrow Atomic time and date with manual setting Automatically updates for Daylight Saving Time (on/off option) Time display (hour / minute) Perpetual calendar (month / date / weekday) Seven Time zones: Atlantic Time (AST) Eastern Time (EST)
BUTTON FUNCTIONS: Button Press and Release Functions Hold 2 seconds Move through program menu (setup) Enter program menu, set time, °F/°C Select temperature in °F/°C date, etc. (setup) Search for outdoor Transmitter 1 step forward (setup) Fast advance (setup) Fast backward (setup) 1 step backward (setup) WWVB Search SNOOZE...
12 OR 24 HOUR TIME FORMAT: The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time. Note: When in 12-hour format AM or PM will show in front of the hour. 12Hr 1. 12H will flash. 2.
ALARM ACTIVATION ICON: Press and release the ALARM button once to show Alarm Time. With the Alarm time showing, press and release the ALARM button to activate the alarm. The alarm icon appears when alarm is activated. With the Alarm time showing, press and release the ALARM button to deactivate the alarm. The alarm icon will disappear when alarm is activated.
INSTALL BATTERIES IN THE DIGITAL ATOMIC CLOCK: 1. Remove battery cover: Slide tab to the down and pull out to remove battery cover. 2. Install two fresh AA batteries according to the polarity markings. Do Not Mix Old and New Batteries Do Not Mix Alkaline, Lithium, Standard, or Rechargeable Batteries If the Digital Atomic Clock does not show indoor temperature after 60...
Wall Mount Choose a shaded location (under an overhang) for the transmitter that is within the confirmed wireless reception range of the Digital Atomic Clock for accuracy. Install one mounting screw (not included) into a wall leaving approximately ½ of an inch (12.7mm) extended.
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.
For warranty work, technical support, or information contact: La Crosse Technology, Ltd 2817 Losey Blvd. S. La Crosse, WI 54601 The complete instruction manual is available at: www.lacrossetechnology.com/k86302 Protected under U.S. Patents: 5,978,738 6,076,044 6,597,990 Contact Support: 1-608-782-1610 Product Registration: www.lacrossetechnology.com/support/register FCC DISCLAIMER: This Device complies with Part 15 of the FCC Rules.
Need help?
Do you have a question about the K86302 and is the answer not in the manual?
Questions and answers